Publications

Living in an informal settlement with a visual impairment can be very challenging resulting in social exclusion. Mobile phones have been shown to be hugely beneficial to people with sight loss in formal and high-income settings. However, little is known about whether these results hold true for people with visual impairment (VIPs) in informal settlements. We present the findings of a case study of mobile technology use by VIPs in Kibera, an informal settlement in Nairobi. We used contextual interviews, ethnographic observations and a co-design workshop to explore how VIPs use mobile phones in their daily lives, and how this use influences the social infrastructure of VIPs. Our findings suggest that mobile technology supports and shapes the creation of social infrastructure. However, this is only made possible through the existing support networks of the VIPs, which are mediated through four types of interaction: direct, supported, dependent and restricted.

Giulia Barbareschi, Catherine Holloway, Katherine Arnold, Grace Magomere, Wycliffe Ambeyi Wetende, Gabriel Ngare, and Joyce Olenja. 2020. The Social Network: How People with Visual Impairment use Mobile Phones in Kibera, Kenya. In Proceedings of the 2020 CHI Conference on Human Factors in Computing Systems (CHI '20). Association for Computing Machinery, New York, NY, USA, 1–15. https://doi.org/10.1145/331383...

• COVID-19 has conferred new experiential knowledge on society and a rare opportunity to better understand the social model of disability and to improve the lives of persons with disabilities.
• The COVID-19 experience may offer contextual knowledge of the prepandemic lives of persons with disabilities and foster greater social awareness, responsibility and opportunities for change towards a more inclusive society.
• Information, family and social relationships, health protection and healthcare, education, transport and employment should be accessible for all groups of the population. The means must be developed and deployed to ensure equity – the deployment of resources so that people with different types of needs have the same opportunities for living good lives in inclusive communities.
• We have learnt from COVID-19 that inclusive healthcare and universal access should be the new normal, that its provision as a social good is both unifying and empowering for society as a whole.

Ebuenyi ID, Smith EM, Holloway C, et alCOVID-19 as social disability: the opportunity of social empathy for empowermentBMJ Global Health 2020;5:e003039.

Assistive technology is a critical component of maintaining health, wellbeing, and the realization of rights for persons with disabilities. Assistive technologies, and their associated services, are also paramount to ensuring individuals with functional limitations have access to important health and social service information, particularly during a pandemic where they may be at higher risk than the general population. Social isolation and physical distancing have further marginalized many within this population. We have an opportunity to learn from the COVID-19response to develop more inclusive and resilient systems that will serve people with disabilities more effectively in the future. In this Current Issues piece, we present a starting point for discussion, based on our experiences working to promote access to assistive technologies through inclusive and sustainable systems and policies.

Emma M. Smith, Malcolm MacLachlan, Ikenna D. Ebuenyi, Catherine Holloway & Victoria Austin (2021) Developing inclusive and resilient systems: COVID-19 and assistive technology, Disability & Society, 36:1, 151-154, DOI: 10.1080/09687599.2020.1829558

80% of people with disabilities worldwide live in low resourced settings, rural areas, informal settlements and in multidimensional poverty. ICT4D leverages technological innovations to deliver programs for international development. But very few do so with a focus on and involving people with disabilities in low resource settings. Also, most studies largely focus on publishing the results of the research with a focus on the positive stories and not the learnings and recommendations regarding research processes. In short, researchers rarely examine what was challenging in the process of collaboration. We present reflections from the field across four studies. Our contributions are: (1) an overview of past work in computing with a focus on disability in low resource settings and (2) learnings and recommendations from four collaborative projects in Uganda, Jordan and Kenya over the last two years, that are relevant for future HCI studies in low resource settings with communities with disabilities. We do this through a lens of Disability Interaction and ICT4D.

Dafne Zuleima Morgado-Ramirez, Giulia Barbareschi, Maggie Kate Donovan-Hall, Mohammad Sobuh, Nida' Elayyan, Brenda T Nakandi, Robert Tamale Ssekitoleko, joyce Olenja, Grace Nyachomba Magomere, Sibylle Daymond, Jake Honeywill, Ian Harris, Nancy Mbugua, Laurence Kenney, and Catherine Holloway. 2020. Disability design and innovation in computing research in low resource settings. In Proceedings of the 22nd International ACM SIGACCESS Conference on Computers and Accessibility (ASSETS '20). Association for Computing Machinery, New York, NY, USA, Article 11, 1–7. https://doi.org/10.1145/337362...

Amartya Sen’s seminal Tanner lecture: Equality of What? began a contestation on social justice and human wellbeing that saw a new human development paradigm emerge—the capability approach (CA)—which has been influential ever since. Following interviews with leading global assistive technology (AT) stakeholders, and users, this paper takes inspiration from Sen’s core question and posits, AT for what? arguing that AT should be understood as a mechanism to achieve the things that AT users’ value. Significantly, our research found no commonly agreed operational global framework for (disability) justice within which leading AT stakeholders were operating. Instead, actors were loosely aligned through funding priorities and the CRPD. We suggest that this raises the possibility for (welcome and needed) incoming actors to diverge from efficiently designed collective action, due to perverse incentives enabled by unanchored interventions. The Global Report on Assistive Technology (GReAT) helps, greatly! However, we find there are still vital gaps in coordination; as technology advances, and AT proliferates, no longer can the device-plus-service approach suffice. Rather, those of us interested in human flourishing might explore locating AT access within an operational global framework for disability justice, which recognizes AT as a mechanism to achieve broader aims, linked to people’s capabilities to choose what they can do and be.

Austin, V.; Holloway, C. Assistive Technology (AT), for What? Societies 2022, 12, 169. https://doi.org/10.3390/soc120...

Kett, M.; Holloway, C.; Austin, V. Critical Junctures in Assistive Technology and Disability Inclusion. Sustainability 2021, 13, 12744. https://doi.org/10.3390/su1322...

Johan Borg, Wei Zhang, Emma M. Smith & Cathy Holloway (2021) Introduction to the companion papers to the global report on assistive technology, Assistive Technology, 33:sup1, 1-2, DOI: 10.1080/10400435.2021.2003658

Innovations in the field of assistive technology are usually evaluated based on practical considerations related to their ability to perform certain functions. However, social and emotional aspects play a huge role in how people with disabilities interact with assistive products and services. Over a five months period, we tested an innovative wheelchair service provision model that leverages 3D printing and Computer Aided Design to provide bespoke wheelchairs in Kenya. The study involved eight expert wheelchair users and five healthcare professionals who routinely provide wheelchair services in their community. Results from the study show that both users and providers attributed great value to both the novel service delivery model and the wheelchairs produced as part of the study. The reasons for their appreciation went far beyond the practical considerations and were rooted in the fact that the service delivery model and the wheelchairs promoted core values of agency, empowerment and self-expression.

Globally, mobile technology plays a significant role connecting and supporting people with disabilities. However, there has been limited research focused on understanding the impact of mobile technology in the lives of persons with disabilities in low or middle- income countries. This paper presents the findings of a participatory photovoice study looking at the role that mobile phones play in the daily lives of 16 persons with disabilities in Kenya and Bangladesh. Participants used a combination of pictures and voice recordings to capture their own stories and illustrate the impact that mobile phone use has on their lives. Through thematic analysis, we categorized the benefits of mobile phones captured by participants as 1) Improved social connection; 2) Increased independence and 3) Access to opportunities. While mobile phones are ubiquitously used for communication, for persons with disabilities they become essential assistive technologies that bridge barriers to opportunities which are not accessible otherwise. Our paper adds evidence to the need for mobile phones for persons with disabilities to enable communication and connectivity in support of development.

N. Jahan et al., "Inclusion and Independence: The impact of Mobile Technology on the Lives of Persons with Disabilities in Kenya and Bangladesh," 2020 IEEE Global Humanitarian Technology Conference (GHTC), Seattle, WA, USA, 2020, pp. 1-8, doi: 10.1109/GHTC46280.2020.9342934.

For many years, the biggest issue that causes discomfort and hygiene issues for patients with lower limb amputations have been the interface between body and prosthetic, the socket. Often made of an inflexible, solid polymer that does not allow the residual limb to breathe or perspire and with no consideration for the changes in size and shape of the human body caused by changes in temperature or environment, inflammation, irritation and discomfort often cause reduced usage or outright rejection of the prosthetic by the patient in their day to day lives. To address these issues and move towards a future of improved quality of life for patients who suffer amputations, Loughborough University formed the Next Generation Prosthetics research cluster. This work is one of four multidisciplinary research studies conducted by members of this research cluster, focusing on the area of Computer Aided Design (CAD) for improving the interface with Additive Manufacture (AM) to solve some of the challenges presented with improving prosthetic socket design, with an aim to improve and streamline the process to enable the involvement of clinicians and patients in the design process. The research presented in this thesis is based on three primary studies. The first study involved the conception of a CAD criteria, deciding what features are needed to represent the various properties the future socket outlined by the research cluster needs. These criteria were then used for testing three CAD systems, one each from the Parametric, Non Uniform Rational Basis Spline (NURBS) and Polygon archetypes respectively. The result of these tests led to the creation of a hybrid control workflow, used as the basis for finding improvements. The second study explored emerging CAD solutions, various new systems or plug-ins that had opportunities to improve the control model. These solutions were tested individually in areas where they could improve the workflow, and the successful solutions were added to the hybrid workflow to improve and reduce the workflow further. The final study involved taking the knowledge gained from the literature and the first two studies in order to theorise how an ideal CAD system for producing future prosthetic sockets would work, with considerations for user interface issues as well as background CAD applications. The third study was then used to inform the final deliverable of this research, a software design specification that defines how the system would work. This specification was written as a challenge to the CAD community, hoping to inform and aid future advancements in CAD software. As a final stage of research validation, a number of members of the CAD community were contacted and interviewed about their feelings of the work produced and their feedback was taken in order to inform future research in this area.

Bodkin, Troy L. (2017): Specifying a hybrid, multiple material CAD system for next-generation prosthetic design. Loughborough University. Thesis. https://hdl.handle.net/2134/25...;

Transferring independently to and from their wheelchair is an essential routine task for many wheelchair users but it can be physically demanding and can lead to falls and upper limb injuries that reduce the person’s independence. New assistive technologies (ATs) that facilitate the performance of wheelchair transfers have the potential to allow wheelchair users to gain further independence. To ensure that users’ needs are addressed by ATs, the active involvement of wheelchair users in the process of design and development is critical. However, participation can be burdensome for many wheelchair users as design processes where users are directly involved often require prolonged engagement. This thesis makes two contributions to facilitate wheelchair users’ engagement in the participatory design process for ATs, while being mindful of the burden of participation. The first contribution is a framework that provides a modular structure guiding the participatory design process from initial problem identification and analysis to facilitating collaborations between wheelchair users and designers. The framework identifies four factors determining the need and adoption process for ATs: (i) People focuses on the target population, (ii) Person includes personal characteristics, (iii) Activity refers to the challenges associated with the task, and (iv) Context encompasses the effect of the environment in which the activity takes place. The second contribution constitutes a rich picture of personal and external elements influencing real world wheelchair transfers that emerged from four studies carried out to investigate the effect of the framework factors on the design process for ATs. A related outcome based on these contributions is a framing document to share knowledge between wheelchair users and designers to provide focus and promote an equal collaboration among participants.

Barbareschi, Giulia. “YouTransfer, YouDesign : a Participatory Approach to Design Assistive Technology for Wheelchair Transfers / Giulia Barbareschi.” Thesis (Ph.D.)--University College London, 2018., 2018. Print.

Wrist splints are a common treatment for rheumatoid arthritis, however their effectiveness is compromised by patients not wearing splints as often as prescribed. Previous research has identified a number of reasons for non-compliance, but typically lacks insights that could lead to improved splint design.

This thesis investigates the motivators for patients to wear and not wear their wrist splints and, the impact of personalisation of splint appearance on patient wear. The work is based on the premise that digital design and manufacturing processes, such as Computer-Aided Design (CAD) and 3D Printing, can produce bespoke splints on demand.

The research begins with a literature review across the core areas of: splinting, additive manufacture, product appearance and personalisation. This literature review identifies gaps in knowledge from which research questions are established for the work.

The research employs a qualitative, generative design research approach and, follows a codesign framework employing telling, making and enacting tools. The thesis is made up of three studies. The first study is a sensitisation study and uses design probes to prepare the participants for the research and begin exploring the problem space. The second is a comprehensive study into participants splint wear behaviour and uses context mapping and scenario picture card tools to investigate the motivators for participants to wear and not wear wrist splints, along with positive and negative outcomes or wearing/not wearing splints. The final study uses a personalisation toolkit to elicit patient needs for a future wrist splint design and investigate self-reported expectations regarding compliance of patients who used the toolkit.

The research finds that patient compliance is affected by practical and aesthetic limitations of current splints. It identifies 4 motivating factors to wear a splint and 10 motivating factors to not wear a splint. Additionally, it identifies 6 positive outcomes of wearing splints, 6 negative outcomes of wearing splints, 3 positive outcomes of not wearing splints and 3 negative outcomes of not wearing splints. Requirements for an improved splint design are established and form the basis of the design for a prototype personalisation toolkit. Testing of this toolkit reveals that patients are keen to own more than one splint and personalise splints to match the scenario in which it is to be worn. Patients reported that they expected to be more compliant with a personalised splint when compared to their current splint.

Pyatt, Charlotte (2018): Understanding wrist splint user needs and personalisation through codesign. Loughborough University. Thesis. https://doi.org/10.26174/thesi...;

Independent mobility is fundamental to the quality of life of people with impairment. Most people with severe mobility impairments, whether congenital, e.g., from cerebral palsy, or acquired, e.g., from spinal cord injury, are prescribed a wheelchair. A small yet significant number of people are unable to use a typical powered wheelchair controlled with a joystick. Instead, some of these people require alternative interfaces such as a head- array or Sip/Puff switch to drive their powered wheelchairs. However, these alternative interfaces do not work for everyone and often cause frustration, fatigue and collisions. This thesis develops a novel technique to help improve the usability of some of these alternative interfaces, in particular, the head-array and Sip/Puff switch. Control is shared between a powered wheelchair user, using an alternative interface and a pow- ered wheelchair fitted with sensors. This shared control then produces a resulting motion that is close to what the user desires to do but a motion that is also safe. A path planning algorithm on the wheelchair is implemented using techniques in mo- bile robotics. Afterwards, the output of the path planning algorithm and the user’s com- mand are both modelled as random variables. These random variables are then blended in a joint probability distribution where the final velocity to the wheelchair is the one that maximises the joint probability distribution. The performance of the probabilistic approach to blending the user’s inputs with the output of a path planner, is benchmarked against the most common form of shared control called linear blending. The benchmarking consists of several experiments with end users both in a simulated world and in the real-world. The thesis concludes that probabilistic shared control provides safer motion compared with the traditional shared control for difficult tasks and hard-to-use interfaces.

Ezeh, Chinemelu Ejiamatu Muoma. Shared Control for Wheelchair Interfaces. UCL (University College London), 2018. Print.

Facial prostheses are artificial devices that replace a missing body part in the facial and neck regions of the body. Defects or deformities in these regions can lead to functional deficiencies; social and psychological effects in addition to cosmetic defects. Restoration or rehabilitation in resource limited countries is usually provided by charities and organisations volunteering assistance overseas, with some training of local staff in the fabrication of these prostheses. Furthermore, these countries typically lack technical knowhow and trained personnel. In industrialised nations maxillofacial prosthetics has developed into a sophisticated medical speciality requiring highly skilled staff and expensive facilities. In resource limited countries surgical procedures may be an option for rehabilitation of these deformities/defects however, they tend to be unavailable or unaffordable and donated prostheses are not suitable. Hence, this research explores, from first principles, the appropriate and affordable local provision of maxillofacial prostheses in resource constrained regions. The investigation provides knowledge on identifying requirements for resource limited areas, resulting in the creation of a guideline constituting priorities, requirements and specifications. It further explores the viability of potentially cheaper, locally available candidate materials via weathering and antimicrobial methods in ascertaining material longevity.

Tetteh, Sophia (2019): Materials for facial prostheses in resource-limited countries. Loughborough University. Thesis. https://doi.org/10.26174/thesi...;

Amongst lower-limb prosthesis wearers, thermal discomfort is a common problem with an estimated prevalence of more than 50%. Overheating does not just create discomfort to the user, but it has been linked to excessive sweating, skin damage caused by a moist environment and friction. Due to impermeable prosthetic components and a warm moist environment, minor skin damage can result in skin infections that can lead to prosthesis cessation, increased social anxiety, isolation and depression. Despite the seriousness of thermal discomfort, few studies explore the issue, with research predominantly constrained to controlled laboratory scenarios, with only one out of laboratory study. In this thesis, studies investigate how thermal discomfort arises and what are the consequences of thermal discomfort for lower-limb prosthesis wearers. Research studies are designed around the principles of presenting lived experiences of the phenomenon and conducting research in the context of participants' real-life activities. A design exploration chapter investigates modifying liner materials and design to create a passive solution to thermal discomfort. However, this approach was found to be ineffective and unfeasible. Study 1 presents a qualitative study which investigates the user experience of a prosthesis, thermal discomfort and related consequences. Study 2 explores limb temperature of male amputees inside and outside the laboratory, with the latter also collecting perceived thermal comfort (PTC) data. Finally, Study 3 investigates thermal discomfort in the real-world and tracks limb temperature, ambient conditions, activities, and experience sampling of PTC. While there were no apparent relationships presented in sensor data, qualitative data revealed that in situations where prosthesis wearers perceived a lack of control, thermal discomfort seemed to be worse. When combined, the studies create two knowledge contributions. Firstly, the research provides a methodological contribution showing how to conduct mixed-methods research to obtain rich insights into complex prosthesis phenomena. Secondly, the research highlights the need to appreciate psychological and contextual factors when researching prosthesis wearer thermal comfort. The research contributions are also converted into an implication for prosthesis design. The concept of 'regaining control' to psychologically mitigate thermal discomfort could be incorporated into technologies by using 'on-demand' thermal discomfort relief, rather than 'always-on' solutions, as have been created in the past.

Williams, Rhys James. “Exploring Thermal Discomfort Amongst Lower-Limb Prosthesis Wearers.” ProQuest Dissertations Publishing, 2020. Print.

Additive Manufacturing (AM) often known by the term three-dimensional printing (3DP) has been acknowledged as a potential manufacturing revolution. AM has many advantages over conventional manufacturing techniques; AM techniques manufacture through the addition of material - rather than traditional machining or moulding methods. AM negates the need for tooling, enabling cost-effective low-volume production in high-wage economies and the design & production of geometries that cannot be made by other means. In addition, the removal of tooling and the potential to grow components and products layer-by-layer means that we can produce more from less in terms of more efficient use of raw materials and energy or by making multifunctional components and products. The proposed Centre for Doctoral Training (CDT) in Additive Manufacturing and 3D Printing has the vision of training the next generation of leaders, scientists and engineers in this diverse and multi-disciplinary field. As AM is so new current training programmes are not aligned with the potential for manufacturing and generally concentrate on the teaching of Rapid Prototyping principles, and whilst this can be useful background knowledge, the skills and requirements of using this concept for manufacturing are very different. This CDT will be training cohorts of students in all of the basic aspects of AM, from design and materials through to processes and the implementation of these systems for manufacturing high value goods and services. The CDT will also offer specialist training on aspects at the forefront of AM research, for example metallic, medical and multi-functional AM considerations. This means that the cohorts graduating from the CDT will have the background knowledge to proliferate throughout industry and the specialist knowledge to become leaders in their fields, broadening out the reach and appeal of AM as a manufacturing technology and embedding this disruptive technology in company thinking. In order to give the cohorts the best view of AM, these students will be taken on study tours in Europe and the USA, the two main research powerhouses of AM, to learn from their international colleagues and see businesses that use AM on a daily basis. One of the aims of the CDT in AM is to educate and attract students from complementary basic science, whether this be chemistry, physics or biology. This is because AM is a fast moving area. The benefits of having a CDT in AM and coupling with students who have a more fundamental science base are essential to ensure innovation & timeliness to maintain the UK's leading position. AM is a disruptive technology to a number of industrial sectors, yet the CDTs industrial supporters, who represent a breadth of industrial end-users, welcome this disruption as the potential business benefits are significant. Growing on this industry foresight, the CDT will work in key markets with our supporters to ensure that AM is positioned to provide a real and lasting contribution & impact to UK manufacturing and provide economic stability and growth. This contribution will provide societal benefits to UK citizens through the generation of wealth and employment from high value manufacturing activities in the UK.

Kelly, Sarah (2020): Design rules for additively-manufactured wrist splints. Loughborough University. Thesis. https://doi.org/10.26174/thesi...;

The literature shows that research into the aesthetic aspects of prostheses is limited. Although there are suggestions that prostheses with high levels of emotionally-driven design may improve users’ well-being, they are based only on theoretical findings. Therefore, in this thesis, the effects of emotionally-driven prostheses on users’ lives and society’s attitudes were explored, with respect to culture and more specifically, the theories of individualism/ collectivism. In order to investigate the effects of culture, the research was conducted in two countries with different cultures; the UK (individualistic) and Greece (collectivistic). The thesis began with a literature review across three core areas: user, product and environment, and revealed the importance of investigating an additional area; that of prosthetists. The research employed a qualitative approach and consisted of four studies. Study I was an online questionnaire to explore users’ preferences towards prostheses, with respect to their culture. Study II consisted of semi-structured interviews and informational probes to comprehend the role of prostheses on users’ lives, with respect to prosthetic appearance. In Study III, the aim was to investigate prosthetists’ attitudes towards the needs of prosthetic users by conducting semi-structured interviews. Finally, Study IV was an online questionnaire to explore non-users’ attitudes towards the design of prostheses. The research showed that the use of prostheses for the completion of users’ body was not an adequate factor to improve their well-being, and a shift on users’ desires towards emotionally-driven prostheses has occurred. From the variables that were tested, sex, age, cause and area of limb-loss may affect people’s attitudes towards the design of prostheses. Furthermore, the results showed that prostheses with high emotionally-driven design evoked emotions, in both users and non-users, with higher levels of pleasantness and arousal than the emotions that were elicited by the prostheses of lower emotionally-driven designs and thus, they may trigger a greater behavioural reaction. This suggested that emotionally-driven prostheses may eliminate users’ stigmatisation by increasing their self-confidence and altering society’s attitudes. However, attention needs to be paid in collectivistic countries, as emotionally-driven prostheses may enhance users’ stigmatisation.

Vlachaki, Anna (2020): Emotionally-driven prostheses: exploring the effects on users’ lives and societies’ attitudes in the UK and Greece. Loughborough University. Thesis. https://doi.org/10.26174/thesi...;

Orientation and mobility (O&M) training provides essential skills and techniques for safe and independent mobility for blind and partially sighted (BPS) people. The demand for O&M training is increasing as the number of people living with vision impairment increases. Despite the growing portfolio of HCI research on assistive technologies (AT), few studies have examined the experiences of BPS people during O&M training, including the use of technology to aid O&M training. To address this gap, we conducted semi-structured interviews with 20 BPS people and 8 Mobility and Orientation Trainers (MOT). The interviews were thematically analysed and organised into four overarching themes discussing factors influencing the self-efficacy belief of BPS people: Tools and Strategies for O&M training, Technology Use in O&M Training, Changing Personal and Social Circumstances, and Social Influences. We further highlight opportunities for combinations of multimodal technologies to increase access to and effectiveness of O&M training.

Most research which investigates stigma towards with people with disabilities and the use of Assistive Technology (AT) are based in the Global North and focus on the experiences of people with disabilities and the consequences that stigma has on choices surrounding AT. However, stigma is a societal construct rooted in the attitude and beliefs that people without disabilities hold on disability and AT. Furthermore, the portrayal of people with disabilities and AT is dependent on the social context. In this paper, we examine how young Kenyans without disabilities view people with disabilities and AT users. Findings show that while the portrayal of disability is often shaped by negative emotion, participants felt that many of the barriers affecting people with disabilities were created by society. Perceptions of AT differed –devices were not only seen as a mark of disability but also as a sign of access to resources. Therefore, what we see is an emergent picture where social barriers can be reinforced by poverty, and where poverty reinforces social barriers faced by people with disabilities. We conclude that access to appropriate technology alongside societal interventions tackling incorrect beliefs about disability can help to overcome the stigma faced by people with disabilities.

Giulia Barbareschi, Norah Shitawa Kopi, Ben Oldfrey, and Catherine Holloway. 2021. What difference does tech make? Conceptualizations of Disability and Assistive Technology among Kenyan Youth: Conceptualizations of Disability and AT. In The 23rd International ACM SIGACCESS Conference on Computers and Accessibility (ASSETS '21). Association for Computing Machinery, New York, NY, USA, Article 18, 1–13. DOI: https://doi.org/10.1145/3441852.3471226

Assistive products (APs) are broadly defined as “any product (including devices, equipment, instruments, and software), either specially designed and produced or generally available, whose primary purpose is to maintain or improve an individual’s functioning and independence and thereby promote their wellbeing” (Khasnabis et al., 2015). Although the concept of wellbeing is extremely slippery and researchers have yet to agree on a single definition for it, as individuals we instinctively develop mental models about what does, and does not, promote our happiness and wellbeing. Considerations about values, wellbeing and happiness are extremely personal and are shaped by a variety of factors ranging from our age and socio-cultural background to our life experiences (Schwartz & Bardi, 2001).

However, when it comes to assistive technology (AT) research, our focus seems to be primarily geared toward values and activities in the domains of education, employment, transport or health, often framed according to an outcome driven perspective that is heavily influenced by what is seen as useful (often what is measurable), vs what is frivolous (less tangible social or emotional aspects).

This disparity parallels the priorities of the disability rights movement and disability studies research that have helped to shape the research agenda around disability and AT. Often influenced by labor movement politics, or feminism, there appears to have been more concern with public and practical aspects of social life as opposed to the more private and sensitive ones (Shakespeare, 2014). The focus on the public utilitarian function of AT becomes even more evident when we consider AT research carried out in the Global South. In this context the success of an intervention is usually assessed using measures of outcome and impact which can be somehow linked to economic improvement (Alkire, 2016).

In this editorial, we are not suggesting that enabling people with disabilities to gain a good education, obtain a fulfilling job or be able to vote are not important goals for the APs we develop and research. But are those the only worthwhile goals? Should we not also enquire whether existing and future APs could help people with disabilities to develop meaningful friendships, enjoy fulfilling sex lives with their partners of choice, cook sociable dinners, or engage in their favorite hobbies? Although sporadic publications focus on the role of APs in the context of personal relationships, sexuality, or fun and play for people with disabilities do exist, these are rare, and often framed around utilitarian goals. For example, research around AT and play is largely focused on children and often examined in connection to learning outcomes. Similarly, sex and sexuality are often explored solely in connection to dysfunction, abuse or sexual health (Shakespeare & Richardson, 2018).

These unbalanced narratives show how the AT research agenda is dictated by a set of universal priorities that are largely focused on global measurable goals that do not necessarily match the everyday values of people with disabilities. We invite researchers and practitioners to consider ways to find a better balance between public and private aspects of life, and between utilitarian and emotional values. Both approaches have a significant impact on the lives of people with disabilities.

Ultimately, as AT researchers we need to actively engage with people with disabilities to uncover their priorities, understand what different people with disabilities most value in life, and identify how current and future APs might help to make a positive impact on wellbeing. Aspects of life such as friendship, socialization, sexuality, love and play might indeed be more frivolous than practical ones such as education, health, employment and civil rights, but they are inherent to our shared humanity and fundamental to our happiness.

Giulia Barbareschi & Tom Shakespeare (2021) A right to the frivolous? Renegotiating a wellbeing agenda for AT research, Assistive Technology, 33:5, 237, DOI: 10.1080/10400435.2021.1984112

Shape changing materials create a unique opportunity to design reconfigurable tactile display actuators. In this paper, we present a method that transforms a single thin monolithic sheet of Nitinol into a passive reconfigurable tactile pixel array at Braille resolution. We have designed a 27x27 tactile pixel array in which each pixel can be selectively actuated with an external source of heat. The pixels rise 0.4mm vertically with a peak blocked force of 0.28kg and have an average blocked force of 0.23kg at room temperature. After cooling, the pixels can be mechanically reconfigured back to their flat state for repeatable actuation. We demonstrate this actuator’s interactive capabilities through a novel erasable tactile drawing interface.

T. Bhatnagar, N. Marquardt, M. Miodownik and C. Holloway, "Transforming a Monolithic Sheet of Nitinol into a Passive Reconfigurable Tactile Pixel Array Display at Braille Resolution," 2021 IEEE World Haptics Conference (WHC), 2021, pp. 409-414, doi: 10.1109/WHC49131.2021.9517239.