Publications

Abstract

Purpose

To investigate the practices of repair that exist for users of mobility assistive products in low resource settings, as well as the psychosocial impact that the repair, or non-repair, of these devices has on users’ lives.

Materials and Methods

This article collates data on repair practices and the responses from participants on the topic of repair from studies conducted by the authors across four different low resource settings in Kenya, Uganda, Sierra Leone, and Indonesia. This data was then analyzed to identify the common themes found across geographies.

Results

Three major models of repair practice emerged from the data: “Individual or Informal Repair in the Community”; “Local Initiatives”; and “Specialist AT Workshop Repair”. Additionally, the wider impact on the participants’ lives of “Problems & Concerns with Repair”; “Experiences of Breakages & Frequencies of Repair” and the “Impact of Broken Devices” are explored.

Conclusions

The results of this analysis demonstrate the paramount importance of community-based repair of devices, and how despite this importance, repair is often overlooked in the planning and design of assistive products and services. There is a need to further incorporate and support these informal contributions as part of the formal provision systems of assistive device.

Ben Oldfrey, Cathy Holloway, Julian Walker, Steven McCormack, Bernadette Deere, Laurence Kenney, Robert Ssekitoleko, Helen Ackers & Mark Miodownik (2023) Repair strategies for assistive technology in low resource settings, Disability and Rehabilitation: Assistive Technology, DOI: 10.1080/17483107.2023.2236142

Assistive technology is a critical component of maintaining health, wellbeing, and the realization of rights for persons with disabilities. Assistive technologies, and their associated services, are also paramount to ensuring individuals with functional limitations have access to important health and social service information, particularly during a pandemic where they may be at higher risk than the general population. Social isolation and physical distancing have further marginalized many within this population. We have an opportunity to learn from the COVID-19response to develop more inclusive and resilient systems that will serve people with disabilities more effectively in the future. In this Current Issues piece, we present a starting point for discussion, based on our experiences working to promote access to assistive technologies through inclusive and sustainable systems and policies.

Emma M. Smith, Malcolm MacLachlan, Ikenna D. Ebuenyi, Catherine Holloway & Victoria Austin (2021) Developing inclusive and resilient systems: COVID-19 and assistive technology, Disability & Society, 36:1, 151-154, DOI: 10.1080/09687599.2020.1829558

Amartya Sen’s seminal Tanner lecture: Equality of What? began a contestation on social justice and human wellbeing that saw a new human development paradigm emerge—the capability approach (CA)—which has been influential ever since. Following interviews with leading global assistive technology (AT) stakeholders, and users, this paper takes inspiration from Sen’s core question and posits, AT for what? arguing that AT should be understood as a mechanism to achieve the things that AT users’ value. Significantly, our research found no commonly agreed operational global framework for (disability) justice within which leading AT stakeholders were operating. Instead, actors were loosely aligned through funding priorities and the CRPD. We suggest that this raises the possibility for (welcome and needed) incoming actors to diverge from efficiently designed collective action, due to perverse incentives enabled by unanchored interventions. The Global Report on Assistive Technology (GReAT) helps, greatly! However, we find there are still vital gaps in coordination; as technology advances, and AT proliferates, no longer can the device-plus-service approach suffice. Rather, those of us interested in human flourishing might explore locating AT access within an operational global framework for disability justice, which recognizes AT as a mechanism to achieve broader aims, linked to people’s capabilities to choose what they can do and be.

Austin, V.; Holloway, C. Assistive Technology (AT), for What? Societies 2022, 12, 169. https://doi.org/10.3390/soc120...

The importance of assistive technology (AT) is gaining recognition, with the World Health Organisation (WHO) set to publish a Global Report in 2022. Yet little is understood about access for the poorest, or the potential of AT to enable this group to participate in the activities of citizenship; both formal and informal. The aim of this qualitative study was to explore AT as mediator of participation in citizenship for persons with disabilities who live in two informal settlements in Freetown, Sierra Leone (SL). The paper presents evidence from 16 participant and 5 stakeholder interviews; 5 focus groups and 4 events; combining this with the findings of a house-to-house AT survey; and two national studies—a country capacity assessment and an informal markets deep-dive. Despite citizenship activities being valued, a lack of AT was consistently reported and hindered participation. Stigma was also found to be a major barrier. AT access for the poorest must be addressed if citizenship participation for persons with disabilities is a genuine global intention and disability justice is to become a reality.

Austin, V.; Holloway, C.; Ossul Vermehren, I.; Dumbuya, A.; Barbareschi, G.; Walker, J. “Give Us the Chance to Be Part of You, We Want Our Voices to Be Heard”: Assistive Technology as a Mediator of Participation in (Formal and Informal) Citizenship Activities for Persons with Disabilities Who Are Slum Dwellers in Freetown, Sierra Leone. Int. J. Environ. Res. Public Health 2021, 18, 5547. https://doi.org/10.3390/ijerph...

Elastomeric liners are commonly worn between the prosthetic socket and the limb. A number of improvements to the state of the art of liner technology are required to address outstanding problems. A liner that conforms to the residuum more accurately, may improve the skin health at the stump-socket interface. Previous work has shown that for effective thermal management of the socket environment, an active heat removal system is required, yet this is not available. Volume tracking of the stump could be used as a diagnostic tool for looking at the changes that occur across the day for all users, which depend on activity level, position, and the interaction forces of the prosthetic socket with the limb. We believe that it would be advantageous to embed these devices into a smart liner, which could be replaced and repaired more easily than the highly costly and labour-intensive custom-made socket. This paper presents the work to develop these capabilities in soft material technology, with: the development of a printable nanocomposite stretch sensor system; a low-cost digital method for casting bespoke prosthetic liners; a liner with an embedded stretch sensor for growth / volume tracking; a model liner with an embedded active cooling system.

, Additive manufacturing techniques for smart prosthetic liners, Medical Engineering & Physics, Volume 87, 2021, Pages 45-55, ISSN 1350-4533, https://doi.org/10.1016/j.mede....

Kett, M.; Holloway, C.; Austin, V. Critical Junctures in Assistive Technology and Disability Inclusion. Sustainability 2021, 13, 12744. https://doi.org/10.3390/su1322...

From multiple studies conducted through the FCDO AT2030 Programme, as well as key literature, we examine whether Assistive Technology (AT) provision models could look towards more sustainable approaches, and by doing this benefit not only the environment, but also address the problems that the current provision systems have. We show the intrinsic links between disability inclusion and the climate crisis, and the particular vulnerability people with disabilities face in its wake. In particular, we discuss how localised circular models of production could be beneficial, facilitating context driven solutions and much needed service elements such as repair and maintenance. Key discussion areas include systems approaches, digital fabrication, repair and reuse, and material recovery. Finally, we look at what needs be done in order to enable these approaches to be implemented. In conclusion, we find that there are distinct parallels between what AT provision models require to improve equitable reliable access, and strategies that could reduce environmental impact and bring economic benefit to local communities. This could allow future AT ecosystems to be key demonstrators of circular models, however further exploration of these ideas is required to make sense of the correct next steps. What is key in all respects, moving forward, is aligning AT provision with sustainability interventions.

Oldfrey, B.; Barbareschi, G.; Morjaria, P.; Giltsoff, T.; Massie, J.; Miodownik, M.; Holloway, C. Could Assistive Technology Provision Models Help Pave the Way for More Environmentally Sustainable Models of Product Design, Manufacture and Service in a Post-COVID World? Sustainability 2021, 13, 10867. https://doi.org/10.3390/su1319...

It is essential to understand the strategies and processes which are deployed currently across the Assistive Technology (AT) space toward measuring innovation. The main aim of this paper is to identify functional innovation strategies and processes which are being or can be deployed in the AT space to increase access to AT globally. We conducted a scoping review of innovation strategies and processes in peer-reviewed literature databases and complemented this by identifying case studies demonstrating innovation strategies. The review includes WHO world region, publication year, AT type and a sector analysis against the Systems-Market for Assistive and Related Technologies Framework. We analyzed the case studies and interviews using thematic analysis. We included 91 papers out of 3,127 after review along with 72 case studies. Our results showed that product innovations were more prevalent than provision or supply innovations across papers and case studies. Case studies yielded two themes: open innovation (OI); radical and disruptive innovation. Financial instruments which encourage OI are needed and we recommend pursuing OI for AT innovation. Embedding AT within larger societal missions will be key to success governments and investors need to understand what AT is and their translational socioeconomic value.

Catherine Holloway, Dafne Zuleima Morgado Ramirez, Tigmanshu Bhatnagar, Ben Oldfrey, Priya Morjaria, Soikat Ghosh Moulic, Ikenna D. Ebuenyi, Giulia Barbareschi, Fiona Meeks, Jessica Massie, Felipe Ramos-Barajas, Joanne McVeigh, Kyle Keane, George Torrens, P. V.M. Rao, Malcolm MacLachlan, Victoria Austin, Rainer Kattel, Cheryl D Metcalf & Srinivasan Sujatha (2021) A review of innovation strategies and processes to improve access to AT: Looking ahead to open innovation ecosystems, Assistive Technology, 33:sup1, 68-86, DOI: 10.1080/10400435.2021.1970653

The purpose of this commentary is to discuss how Paralympic coverage in sub-Saharan Africa can be effectively mobilised to stimulate discursive and structural change around disability. Paralympic coverage has demonstrated its pedagogical power to engage public(s) and challenge stigma toward disability. Yet, the Global picture of Paralympic broadcasting is deeply uneven, with audiences in parts of the Global South afforded limited opportunities to watch the Games. Considering this, the International Paralympic Committee has begun to broadcast Paralympic coverage across sub-Saharan Africa with an explicit aim to challenge stigma toward disability. In this article, we draw on examples from research to argue that ideas from the field of Communication for Social Change (CfSC) can add value towards this aim. We begin by providing a brief overview of CfSC before critically examining one of the field’s key concepts – Communicative (E)ecologies. Following this, we critically reflect on the potential of Paralympic broadcasting as a vehicle for social change and disability rights agendas in sub-Saharan Africa. We argue that thinking with CfSC concepts show the importance of a ‘decentred’ media approach that engages with disability community advocacy groups, localised communication activities and practices, and culturally specific disability narratives.

Noske-Turner, J., Pullen, E., Magalasi, M., Haslett, D., & Tacchi, J. (2022). Paralympic Broadcasting in Sub-Saharan Africa: Sport, Media and Communication for Social Change. Communication & Sport, 10(5), 1001–1015. https://doi.org/10.1177/216747...

The London 2012 Paralympic Games was called “the most successful Paralympic Games ever” (by the then-President of the IPC), and it saw more athletes from more countries than ever before compete and become global heroes for the first time in a redeveloped part of East London which also hosted “the most accessible Olympic Games ever” that summer. However, the model used to design and deliver disability inclusion for London 2012, and its legacy, has never been explicitly written up. This paper presents new primary evidence from first-hand research from those who were involved; retrospectively framing the London 2012 Disability Inclusion Model such that it might be usable and developed for other global disability challenges. We used an adapted Delphi methodology, through four rounds: beginning with an initial hypothesis and testing through semi-structured interviews with ten key players in the London 2012 disability inclusion approach. Using thematic analysis with consensus building surveys and workshops we came to a settled unanimous agreement on the 12-step London 2012 Disability Inclusion Model comprising three parts: (Get ready) community-led mission setting, (Get set) essential building blocks and (Go) enabling a culture of success. The model is presented here, alongside a narrative on its uniqueness and replicability to other major programs, as a public good. We welcome its active use, testing and adaption by others in service of disability innovation for a fairer world.

Victoria Austin, Kate Mattick, and Cathy Holloway. 2021. "“This Is the Story of Community Leadership with Political Backing. (PM1)” Critical Junctures in Paralympic Legacy: Framing the London 2012 Disability Inclusion Model for New Global Challenges" Sustainability 13, no. 16: 9253. https://doi.org/10.3390/su13169253