Publications

Filter by theme

Filter by research group

""

Type

Conference Paper

Themes

Assistive & Accessible Technology
Culture and Participation
The Social Network: How People with Visual Impairment use Mobile Phones in Kibera, Kenya

Giulia Barbareschi, Catherine Holloway, Katherine Arnold, Grace Magomere, Wycliffe Ambeyi Wetende, Gabriel Ngare, Joyce Olenja

We present the findings of a case study of mobile technology use by People with Visual Impairment (VIPs) in Kibera, an informal settlement in Nairobi. We used contextual interviews, ethnographic observations and a co-design workshop to explore how VIPs use mobile phones in their daily lives, and how this use influences the social infrastructure of VIPs. Our findings suggest that mobile technology supports and shapes the creation of social infrastructure. However, this is only made possible through the existing support networks of the VIPs, which are mediated through four types of interaction: direct, supported, dependent and restricted.

CHI '20: Proceedings of the 2020 CHI Conference; 2020

Visit publisher

Abstract

The Social Network: How People with Visual Impairment use Mobile Phones in Kibera, Kenya

Living in an informal settlement with a visual impairment can be very challenging resulting in social exclusion. Mobile phones have been shown to be hugely beneficial to people with sight loss in formal and high-income settings. However, little is known about whether these results hold true for people with visual impairment (VIPs) in informal settlements. We present the findings of a case study of mobile technology use by VIPs in Kibera, an informal settlement in Nairobi. We used contextual interviews, ethnographic observations and a co-design workshop to explore how VIPs use mobile phones in their daily lives, and how this use influences the social infrastructure of VIPs. Our findings suggest that mobile technology supports and shapes the creation of social infrastructure. However, this is only made possible through the existing support networks of the VIPs, which are mediated through four types of interaction: direct, supported, dependent and restricted.

Cite

The Social Network: How People with Visual Impairment use Mobile Phones in Kibera, Kenya

Giulia Barbareschi, Catherine Holloway, Katherine Arnold, Grace Magomere, Wycliffe Ambeyi Wetende, Gabriel Ngare, and Joyce Olenja. 2020. The Social Network: How People with Visual Impairment use Mobile Phones in Kibera, Kenya. In Proceedings of the 2020 CHI Conference on Human Factors in Computing Systems (CHI '20). Association for Computing Machinery, New York, NY, USA, 1–15. https://doi.org/10.1145/331383...

The Social Network: How People with Visual Impairment use Mobile Phones in Kibera, Kenya

Type

Conference Paper
Disability design and innovation in computing research in low resource settings

Dafne Zuleima Morgado-Ramirez, Giulia Barbareschi, Maggie Kate Donovan-Hall, Mohammad Sobuh, Nida' Elayyan, Brenda T Nakandi, Robert Tamale Ssekitoleko, joyce Olenja, Grace Nyachomba Magomere, Sibylle Daymond, Jake Honeywill, Ian Harris, Nancy Mbugua, Laurence Kenney, Catherine Holloway

80% of people with disabilities worldwide live in low resourced settings, rural areas, informal settlements and in multidimensional poverty. ICT4D leverages technological innovations to deliver programs for international development. But very few do so with a focus on and involving people with disabilities in low resource settings. Also, most studies largely focus on publishing the results of the research with a focus on the positive stories and not the learnings and recommendations regarding research processes.

ASSETS '20: Proceedings of the 22nd International ACM SIGACCESS Conference on Computers and Accessibility; 2020

Visit publisher

Abstract

Disability design and innovation in computing research in low resource settings

80% of people with disabilities worldwide live in low resourced settings, rural areas, informal settlements and in multidimensional poverty. ICT4D leverages technological innovations to deliver programs for international development. But very few do so with a focus on and involving people with disabilities in low resource settings. Also, most studies largely focus on publishing the results of the research with a focus on the positive stories and not the learnings and recommendations regarding research processes. In short, researchers rarely examine what was challenging in the process of collaboration. We present reflections from the field across four studies. Our contributions are: (1) an overview of past work in computing with a focus on disability in low resource settings and (2) learnings and recommendations from four collaborative projects in Uganda, Jordan and Kenya over the last two years, that are relevant for future HCI studies in low resource settings with communities with disabilities. We do this through a lens of Disability Interaction and ICT4D.

Cite

Disability design and innovation in computing research in low resource settings

Dafne Zuleima Morgado-Ramirez, Giulia Barbareschi, Maggie Kate Donovan-Hall, Mohammad Sobuh, Nida' Elayyan, Brenda T Nakandi, Robert Tamale Ssekitoleko, joyce Olenja, Grace Nyachomba Magomere, Sibylle Daymond, Jake Honeywill, Ian Harris, Nancy Mbugua, Laurence Kenney, and Catherine Holloway. 2020. Disability design and innovation in computing research in low resource settings. In Proceedings of the 22nd International ACM SIGACCESS Conference on Computers and Accessibility (ASSETS '20). Association for Computing Machinery, New York, NY, USA, Article 11, 1–7. https://doi.org/10.1145/337362...

Disability design and innovation in computing research in low resource settings

Colour photograph of Daniel wearing a white checked shirt and sitting at a desk facing the camera

Type

Article

Themes

Assistive & Accessible Technology
These tools help visually impaired scientists read data and journals

This article was featured in Nature and discusses tools that help visually impaired scientists read data and Journals. Innovation Manager, Daniel Hajas, was interviewed as part of this piece and highlights the need for an ecosystem approach, and access to data / visualisations for blind members of the research and science community.

Nature; 2023

These tools help visually impaired scientists read data and journals

Graphic images of wheelchair configurations

Type

Conference Paper

Themes

Assistive & Accessible Technology
Value beyond function: analyzing the perception of wheelchair innovations in Kenya

Barbareschi, G; Daymond, S; Honeywill, J; Singh, A; Noble, D; Mbugua, N; Harris, I; Austin, V; Holloway, C

The World Health Organization (WHO) defines Assistive Technology (AT) as “an umbrella term covering the systems and services related to the delivery of assistive products and services” [6]. This definition highlights how AT encompasses not only the physical and digital products used by millions of persons with disabilities (PWDs) worldwide, but also the systems and services that accompany the provision of these devices [78].

ASSETS '20: The 22nd International ACM SIGACCESS Conference on Computers and Accessibility.; 2020

Visit publisher

Abstract

Value beyond function: analyzing the perception of wheelchair innovations in Kenya

Innovations in the field of assistive technology are usually evaluated based on practical considerations related to their ability to perform certain functions. However, social and emotional aspects play a huge role in how people with disabilities interact with assistive products and services. Over a five months period, we tested an innovative wheelchair service provision model that leverages 3D printing and Computer Aided Design to provide bespoke wheelchairs in Kenya. The study involved eight expert wheelchair users and five healthcare professionals who routinely provide wheelchair services in their community. Results from the study show that both users and providers attributed great value to both the novel service delivery model and the wheelchairs produced as part of the study. The reasons for their appreciation went far beyond the practical considerations and were rooted in the fact that the service delivery model and the wheelchairs promoted core values of agency, empowerment and self-expression.

Value beyond function: analyzing the perception of wheelchair innovations in Kenya

Mobile phone kiosk features mobile devices, plugs and other accesories.

Type

Conference Paper

Themes

Assistive & Accessible Technology
Culture and Participation
Inclusion and Independence: The impact of Mobile Technology on the Lives of Persons with Disabilities in Kenya and Bangladesh

Nusrat Jahan, Giulia Barbareschi, Clara Aranda Jan, Charles Musungu Mutuku, Naemur Rahman, Victoria Austin, Catherine Holloway

Worldwide it is estimated that there are over a billion people who live with some form of disability [1]. Approximately 80% of people with disabilities live in low-and-middle income countries (LMICs). The combination of an inaccessible environment compounded by socio-economic factors such as poverty and stigma, makes it more likely for people with disabilities to be marginalised and excluded from society [1]. Assistive Technologies (ATs) are known to bridge the accessibility gaps and allow for greater social inclusion. However, there is a lack of adequate access to ATs in LMICs, combined with often poorly designed services, which only magnifies these challenges, thus limiting the opportunities for persons with disabilities to live an independent life [2]. Despite the importance of AT, access to AT globally is inadequate with only 10 percent of those in need having access to the ATs that they need [2].

2020 IEEE Global Humanitarian Technology Conference

Visit publisher

Abstract

Inclusion and Independence: The impact of Mobile Technology on the Lives of Persons with Disabilities in Kenya and Bangladesh

Globally, mobile technology plays a significant role connecting and supporting people with disabilities. However, there has been limited research focused on understanding the impact of mobile technology in the lives of persons with disabilities in low or middle- income countries. This paper presents the findings of a participatory photovoice study looking at the role that mobile phones play in the daily lives of 16 persons with disabilities in Kenya and Bangladesh. Participants used a combination of pictures and voice recordings to capture their own stories and illustrate the impact that mobile phone use has on their lives. Through thematic analysis, we categorized the benefits of mobile phones captured by participants as 1) Improved social connection; 2) Increased independence and 3) Access to opportunities. While mobile phones are ubiquitously used for communication, for persons with disabilities they become essential assistive technologies that bridge barriers to opportunities which are not accessible otherwise. Our paper adds evidence to the need for mobile phones for persons with disabilities to enable communication and connectivity in support of development.

Cite

Inclusion and Independence: The impact of Mobile Technology on the Lives of Persons with Disabilities in Kenya and Bangladesh

N. Jahan et al., "Inclusion and Independence: The impact of Mobile Technology on the Lives of Persons with Disabilities in Kenya and Bangladesh," 2020 IEEE Global Humanitarian Technology Conference (GHTC), Seattle, WA, USA, 2020, pp. 1-8, doi: 10.1109/GHTC46280.2020.9342934.

Inclusion and Independence: The impact of Mobile Technology on the Lives of Persons with Disabilities in Kenya and Bangladesh

Type

Conference Paper

Themes

Assistive & Accessible Technology

Research Group

Local Productions
A Preliminary Study to Understand How Mainstream Accessibility and Digital Assistive Technologies Reaches People in Lower- and Middle-Income Countries

Tigmanshu Bhatnagar, George Torrens, Ben Oldfrey, Priya Morjaria
Felipe Ramos Barajas, Katherine Perry and Catherine Holloway

End Superscript

Access to information on digital platforms not only facilitates education, employment, entertainment, social interaction but also facilitates critical governmental services, ecommerce, healthcare services and entrepreneurship [1]. Article 9 of United Nations Convention on the Rights of Persons with Disabilities (UNCRPD) enforces its signatories to commit to provide full accessibility to every citizen of the nation [2]. This has helped to spearhead accessibility directives such as the European Accessibility Act [3] that aims to improve the functioning of markets for accessible products and services. Such directives contribute to ensure that mainstream digital technologies (smartphones, computers etc.) are accessible for everyone and without being socially remarkable, they are able to assist in daily living. Additionally, there is evidence that improving access in mainstream technologies improves product experience and usability for everyone [4]. However, mainstream access has not been fully realized, leading to inferior opportunities for people with disabilities, a disparity which is more prominent in lower and middle-income countries [5].

RESNA Annual Conference; 2021

A Preliminary Study to Understand How Mainstream Accessibility and Digital Assistive Technologies Reaches People in Lower- and Middle-Income Countries

Kenyan man holding a prosthesis

Type

PhD

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
Specifying a Hybrid, Multiple Material CAD System for Next Generation Prosthetic Design

Troy Bodkin

Doctoral Thesis. This work is one of four multidisciplinary research studies conducted by members of this research cluster, focusing on the area of Computer Aided Design (CAD) for improving the interface with Additive Manufacture (AM) to solve some of the challenges presented with improving prosthetic socket design, with an aim to improve and streamline the process to enable the involvement of clinicians and patients in the design process.

Loughborough University

Visit publisher

Abstract

Specifying a Hybrid, Multiple Material CAD System for Next Generation Prosthetic Design

For many years, the biggest issue that causes discomfort and hygiene issues for patients with lower limb amputations have been the interface between body and prosthetic, the socket. Often made of an inflexible, solid polymer that does not allow the residual limb to breathe or perspire and with no consideration for the changes in size and shape of the human body caused by changes in temperature or environment, inflammation, irritation and discomfort often cause reduced usage or outright rejection of the prosthetic by the patient in their day to day lives. To address these issues and move towards a future of improved quality of life for patients who suffer amputations, Loughborough University formed the Next Generation Prosthetics research cluster. This work is one of four multidisciplinary research studies conducted by members of this research cluster, focusing on the area of Computer Aided Design (CAD) for improving the interface with Additive Manufacture (AM) to solve some of the challenges presented with improving prosthetic socket design, with an aim to improve and streamline the process to enable the involvement of clinicians and patients in the design process. The research presented in this thesis is based on three primary studies. The first study involved the conception of a CAD criteria, deciding what features are needed to represent the various properties the future socket outlined by the research cluster needs. These criteria were then used for testing three CAD systems, one each from the Parametric, Non Uniform Rational Basis Spline (NURBS) and Polygon archetypes respectively. The result of these tests led to the creation of a hybrid control workflow, used as the basis for finding improvements. The second study explored emerging CAD solutions, various new systems or plug-ins that had opportunities to improve the control model. These solutions were tested individually in areas where they could improve the workflow, and the successful solutions were added to the hybrid workflow to improve and reduce the workflow further. The final study involved taking the knowledge gained from the literature and the first two studies in order to theorise how an ideal CAD system for producing future prosthetic sockets would work, with considerations for user interface issues as well as background CAD applications. The third study was then used to inform the final deliverable of this research, a software design specification that defines how the system would work. This specification was written as a challenge to the CAD community, hoping to inform and aid future advancements in CAD software. As a final stage of research validation, a number of members of the CAD community were contacted and interviewed about their feelings of the work produced and their feedback was taken in order to inform future research in this area.

Cite

Specifying a Hybrid, Multiple Material CAD System for Next Generation Prosthetic Design

Bodkin, Troy L. (2017): Specifying a hybrid, multiple material CAD system for next-generation prosthetic design. Loughborough University. Thesis. https://hdl.handle.net/2134/25...;

Specifying a Hybrid, Multiple Material CAD System for Next Generation Prosthetic Design

Image of a young man in a red t-shirt sitting in his wheelchair inside a community space

Type

PhD

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
YouTransfer, YouDesign: A Participatory Approach to Design Assistive Technology for Wheelchair Transfers

Giulia Barbareschi

Doctoral Thesis. This thesis makes two contributions to facilitate wheelchair users’ engagement in the participatory design process for ATs, while being mindful of the burden of participation. The first contribution is a framework that provides a modular structure guiding the participatory design process from initial problem identification and analysis to facilitating collaborations between wheelchair users and designers. The framework identifies four factors determining the need and adoption process for ATs: (i) People focuses on the target population, (ii) Person includes personal characteristics, (iii) Activity refers to the challenges associated with the task, and (iv) Context encompasses the effect of the environment in which the activity takes place. The second contribution constitutes a rich picture of personal and external elements influencing real world wheelchair transfers that emerged from four studies carried out to investigate the effect of the framework factors on the design process for ATs.

UCL (University College London)

Visit publisher

Abstract

YouTransfer, YouDesign: A Participatory Approach to Design Assistive Technology for Wheelchair Transfers

Transferring independently to and from their wheelchair is an essential routine task for many wheelchair users but it can be physically demanding and can lead to falls and upper limb injuries that reduce the person’s independence. New assistive technologies (ATs) that facilitate the performance of wheelchair transfers have the potential to allow wheelchair users to gain further independence. To ensure that users’ needs are addressed by ATs, the active involvement of wheelchair users in the process of design and development is critical. However, participation can be burdensome for many wheelchair users as design processes where users are directly involved often require prolonged engagement. This thesis makes two contributions to facilitate wheelchair users’ engagement in the participatory design process for ATs, while being mindful of the burden of participation. The first contribution is a framework that provides a modular structure guiding the participatory design process from initial problem identification and analysis to facilitating collaborations between wheelchair users and designers. The framework identifies four factors determining the need and adoption process for ATs: (i) People focuses on the target population, (ii) Person includes personal characteristics, (iii) Activity refers to the challenges associated with the task, and (iv) Context encompasses the effect of the environment in which the activity takes place. The second contribution constitutes a rich picture of personal and external elements influencing real world wheelchair transfers that emerged from four studies carried out to investigate the effect of the framework factors on the design process for ATs. A related outcome based on these contributions is a framing document to share knowledge between wheelchair users and designers to provide focus and promote an equal collaboration among participants.

Cite

YouTransfer, YouDesign: A Participatory Approach to Design Assistive Technology for Wheelchair Transfers

Barbareschi, Giulia. “YouTransfer, YouDesign : a Participatory Approach to Design Assistive Technology for Wheelchair Transfers / Giulia Barbareschi.” Thesis (Ph.D.)--University College London, 2018., 2018. Print.

YouTransfer, YouDesign: A Participatory Approach to Design Assistive Technology for Wheelchair Transfers

A man holding a bicycle seat with a 3d printed splint on his wrist

Type

PhD

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
Understanding wrist splint user needs and personalisation through codesign

Charlotte Pyatt

A Doctoral Thesis. Submitted in partial fulfilment of the requirements for the award of the degree of Doctor of Philosophy at Loughborough University.

Loughborough University

Visit publisher

Abstract

Understanding wrist splint user needs and personalisation through codesign

Wrist splints are a common treatment for rheumatoid arthritis, however their effectiveness is compromised by patients not wearing splints as often as prescribed. Previous research has identified a number of reasons for non-compliance, but typically lacks insights that could lead to improved splint design.

This thesis investigates the motivators for patients to wear and not wear their wrist splints and, the impact of personalisation of splint appearance on patient wear. The work is based on the premise that digital design and manufacturing processes, such as Computer-Aided Design (CAD) and 3D Printing, can produce bespoke splints on demand.

The research begins with a literature review across the core areas of: splinting, additive manufacture, product appearance and personalisation. This literature review identifies gaps in knowledge from which research questions are established for the work.

The research employs a qualitative, generative design research approach and, follows a codesign framework employing telling, making and enacting tools. The thesis is made up of three studies. The first study is a sensitisation study and uses design probes to prepare the participants for the research and begin exploring the problem space. The second is a comprehensive study into participants splint wear behaviour and uses context mapping and scenario picture card tools to investigate the motivators for participants to wear and not wear wrist splints, along with positive and negative outcomes or wearing/not wearing splints. The final study uses a personalisation toolkit to elicit patient needs for a future wrist splint design and investigate self-reported expectations regarding compliance of patients who used the toolkit.

The research finds that patient compliance is affected by practical and aesthetic limitations of current splints. It identifies 4 motivating factors to wear a splint and 10 motivating factors to not wear a splint. Additionally, it identifies 6 positive outcomes of wearing splints, 6 negative outcomes of wearing splints, 3 positive outcomes of not wearing splints and 3 negative outcomes of not wearing splints. Requirements for an improved splint design are established and form the basis of the design for a prototype personalisation toolkit. Testing of this toolkit reveals that patients are keen to own more than one splint and personalise splints to match the scenario in which it is to be worn. Patients reported that they expected to be more compliant with a personalised splint when compared to their current splint.

Cite

Understanding wrist splint user needs and personalisation through codesign

Pyatt, Charlotte (2018): Understanding wrist splint user needs and personalisation through codesign. Loughborough University. Thesis. https://doi.org/10.26174/thesi...;

Understanding wrist splint user needs and personalisation through codesign

A screenshot of examples of common interfaces of wheelchair use, a joy stick, head control and sip/puff switch

Type

PhD

Themes

Assistive & Accessible Technology
Shared Control for Wheelchair Interfaces

Dr Chinemelu Ejiamatu Muoma Ezeh

Doctoral Thesis. Independent mobility is fundamental to the quality of life of people with impairment. Most people with severe mobility impairments, whether congenital, e.g., from cerebral palsy, or acquired, e.g., from spinal cord injury, are prescribed a wheelchair. A small yet significant number of people are unable to use a typical powered wheelchair controlled with a joystick. Instead, some of these people require alternative interfaces such as a head- array or Sip/Puff switch to drive their powered wheelchairs. However, these alternative interfaces do not work for everyone and often cause frustration, fatigue and collisions. This thesis develops a novel technique to help improve the usability of some of these alternative interfaces, in particular, the head-array and Sip/Puff switch.

UCL (University College London)

Visit publisher

Abstract

Shared Control for Wheelchair Interfaces

Independent mobility is fundamental to the quality of life of people with impairment. Most people with severe mobility impairments, whether congenital, e.g., from cerebral palsy, or acquired, e.g., from spinal cord injury, are prescribed a wheelchair. A small yet significant number of people are unable to use a typical powered wheelchair controlled with a joystick. Instead, some of these people require alternative interfaces such as a head- array or Sip/Puff switch to drive their powered wheelchairs. However, these alternative interfaces do not work for everyone and often cause frustration, fatigue and collisions. This thesis develops a novel technique to help improve the usability of some of these alternative interfaces, in particular, the head-array and Sip/Puff switch. Control is shared between a powered wheelchair user, using an alternative interface and a pow- ered wheelchair fitted with sensors. This shared control then produces a resulting motion that is close to what the user desires to do but a motion that is also safe. A path planning algorithm on the wheelchair is implemented using techniques in mo- bile robotics. Afterwards, the output of the path planning algorithm and the user’s com- mand are both modelled as random variables. These random variables are then blended in a joint probability distribution where the final velocity to the wheelchair is the one that maximises the joint probability distribution. The performance of the probabilistic approach to blending the user’s inputs with the output of a path planner, is benchmarked against the most common form of shared control called linear blending. The benchmarking consists of several experiments with end users both in a simulated world and in the real-world. The thesis concludes that probabilistic shared control provides safer motion compared with the traditional shared control for difficult tasks and hard-to-use interfaces.

Cite

Shared Control for Wheelchair Interfaces

Ezeh, Chinemelu Ejiamatu Muoma. Shared Control for Wheelchair Interfaces. UCL (University College London), 2018. Print.

Shared Control for Wheelchair Interfaces

Screenshot of a page of the thesis describing function & Type of Maxillofacial Prostheses

Type

PhD

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
Materials For Facial Prostheses In Resource Limited Countries

Sophia Esther Liiba Tetteh

A Doctoral Thesis. Submitted in partial fulfilment of the requirements for the award of the degree of Doctor of Philosophy of Loughborough University

Loughborough University

Visit publisher

Abstract

Materials For Facial Prostheses In Resource Limited Countries

Facial prostheses are artificial devices that replace a missing body part in the facial and neck regions of the body. Defects or deformities in these regions can lead to functional deficiencies; social and psychological effects in addition to cosmetic defects. Restoration or rehabilitation in resource limited countries is usually provided by charities and organisations volunteering assistance overseas, with some training of local staff in the fabrication of these prostheses. Furthermore, these countries typically lack technical knowhow and trained personnel. In industrialised nations maxillofacial prosthetics has developed into a sophisticated medical speciality requiring highly skilled staff and expensive facilities. In resource limited countries surgical procedures may be an option for rehabilitation of these deformities/defects however, they tend to be unavailable or unaffordable and donated prostheses are not suitable. Hence, this research explores, from first principles, the appropriate and affordable local provision of maxillofacial prostheses in resource constrained regions. The investigation provides knowledge on identifying requirements for resource limited areas, resulting in the creation of a guideline constituting priorities, requirements and specifications. It further explores the viability of potentially cheaper, locally available candidate materials via weathering and antimicrobial methods in ascertaining material longevity.

Cite

Materials For Facial Prostheses In Resource Limited Countries

Tetteh, Sophia (2019): Materials for facial prostheses in resource-limited countries. Loughborough University. Thesis. https://doi.org/10.26174/thesi...;

Materials For Facial Prostheses In Resource Limited Countries

Kenyan man holding a prosthesis

Type

PhD

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
Exploring Thermal Discomfort Amongst Lower-Limb Prosthesis Wearers

Rhys James Williams

Thesis: Firstly, the research provides a methodological contribution showing how to conduct mixed-methods research to obtain rich insights into complex prosthesis phenomena. Secondly, the research highlights the need to appreciate psychological and contextual factors when researching prosthesis wearer thermal comfort. The research contributions are also converted into an implication for prosthesis design. The concept of 'regaining control' to psychologically mitigate thermal discomfort could be incorporated into technologies by using 'on-demand' thermal discomfort relief, rather than 'always-on' solutions, as have been created in the past.

UCL, ProQuest Dissertations Publishing

Visit publisher

Abstract

Exploring Thermal Discomfort Amongst Lower-Limb Prosthesis Wearers

Amongst lower-limb prosthesis wearers, thermal discomfort is a common problem with an estimated prevalence of more than 50%. Overheating does not just create discomfort to the user, but it has been linked to excessive sweating, skin damage caused by a moist environment and friction. Due to impermeable prosthetic components and a warm moist environment, minor skin damage can result in skin infections that can lead to prosthesis cessation, increased social anxiety, isolation and depression. Despite the seriousness of thermal discomfort, few studies explore the issue, with research predominantly constrained to controlled laboratory scenarios, with only one out of laboratory study. In this thesis, studies investigate how thermal discomfort arises and what are the consequences of thermal discomfort for lower-limb prosthesis wearers. Research studies are designed around the principles of presenting lived experiences of the phenomenon and conducting research in the context of participants' real-life activities. A design exploration chapter investigates modifying liner materials and design to create a passive solution to thermal discomfort. However, this approach was found to be ineffective and unfeasible. Study 1 presents a qualitative study which investigates the user experience of a prosthesis, thermal discomfort and related consequences. Study 2 explores limb temperature of male amputees inside and outside the laboratory, with the latter also collecting perceived thermal comfort (PTC) data. Finally, Study 3 investigates thermal discomfort in the real-world and tracks limb temperature, ambient conditions, activities, and experience sampling of PTC. While there were no apparent relationships presented in sensor data, qualitative data revealed that in situations where prosthesis wearers perceived a lack of control, thermal discomfort seemed to be worse. When combined, the studies create two knowledge contributions. Firstly, the research provides a methodological contribution showing how to conduct mixed-methods research to obtain rich insights into complex prosthesis phenomena. Secondly, the research highlights the need to appreciate psychological and contextual factors when researching prosthesis wearer thermal comfort. The research contributions are also converted into an implication for prosthesis design. The concept of 'regaining control' to psychologically mitigate thermal discomfort could be incorporated into technologies by using 'on-demand' thermal discomfort relief, rather than 'always-on' solutions, as have been created in the past.

Cite

Exploring Thermal Discomfort Amongst Lower-Limb Prosthesis Wearers

Williams, Rhys James. “Exploring Thermal Discomfort Amongst Lower-Limb Prosthesis Wearers.” ProQuest Dissertations Publishing, 2020. Print.

Exploring Thermal Discomfort Amongst Lower-Limb Prosthesis Wearers