Publications

KEnya paper

Type

Journal Paper

Themes

Assistive & Accessible Technology
The Kenyan assistive technology ecosystem: a network analysis

Emma M. Smith, Catherine Holloway

The objective of this research was to describe the assistive technology ecosystem in Kenya through descriptive information about key stakeholder organizations, and a network analysis demonstrating the nature and strength of relationships between organizations. An assistive technology ecosystem is an interconnected community of actors, including government, civil society, and the private sector who work together or in parallel to deliver assistive products and services to the people who need them. Using the network analysis, we aimed to demonstrate the degree to which key stakeholder organizations within the ecosystem did (or did not) interact, which will provide policy makers with data from which to further develop collaborations within the ecosystem

Taylor & Francis Online; 2024

Download Visit publisher

Abstract

The Kenyan assistive technology ecosystem: a network analysis

Background

Assistive technology is central to the realization of the rights of persons with disabilities. However, there remains limited access to assistive technology throughout much of the world, with particularly poor access in lower- and middle-income countries. Evaluating stakeholder engagement in assistive technology networks has been used as a successful strategy to understand and address gaps in the assistive technology ecosystem.

Objective

The objective of this research was to provide an overview of the Kenyan Assistive Technology Ecosystem, including available assistive products and related services, and an understanding of the nature and strength of relationships between stakeholders

Methods

In this study, we employed an online qualitative stakeholder survey (2021) with representatives of organizations involved in assistive technology in Kenya.

Results

The assistive technology network in Kenya is distributed, with Government Ministries and Agencies and Organizations of persons with disabilities central to the network. The strength of relationships is concentrated on awareness and communication, with fewer organizations actively collaborating. Innovation training organizations are not yet well integrated into the network.

Conclusions

Improving access to assistive technology in Kenya will benefit from greater collaboration amongst all assistive technology stakeholders.

Cite

The Kenyan assistive technology ecosystem: a network analysis

To cite this article:

  1. Emma M. Smith, Stephanie Huff, Rose Bukania, Bernard Chiira, Catherine Holloway & Malcolm MacLachlan (2024) The Kenyan assistive technology ecosystem: a network analysis, Global Health Action, 17:1, DOI: 10.1080/16549716.2024.2302208


The Kenyan assistive technology ecosystem: a network analysis

Type

Journal Paper

Themes

Assistive & Accessible Technology

Research Group

Local Productions
Repair strategies for assistive technology in low resource settings

Ben Oldfrey, Cathy Holloway, Julian Walker, Steven McCormack, Bernadette Deere, Laurence Kenney, Robert Ssekitoleko, Helen Ackers & Mark Miodownik

This paper focuses on the local repair of assistive products in low resource environments. We review the existing literature on the repair of assistive products in low resource settings, and briefly discuss the “Right to Repair” movement.

Disability and Rehabilitation; 2023

Visit publisher

Abstract

Repair strategies for assistive technology in low resource settings

Abstract

Purpose

To investigate the practices of repair that exist for users of mobility assistive products in low resource settings, as well as the psychosocial impact that the repair, or non-repair, of these devices has on users’ lives.

Materials and Methods

This article collates data on repair practices and the responses from participants on the topic of repair from studies conducted by the authors across four different low resource settings in Kenya, Uganda, Sierra Leone, and Indonesia. This data was then analyzed to identify the common themes found across geographies.

Results

Three major models of repair practice emerged from the data: “Individual or Informal Repair in the Community”; “Local Initiatives”; and “Specialist AT Workshop Repair”. Additionally, the wider impact on the participants’ lives of “Problems & Concerns with Repair”; “Experiences of Breakages & Frequencies of Repair” and the “Impact of Broken Devices” are explored.

Conclusions

The results of this analysis demonstrate the paramount importance of community-based repair of devices, and how despite this importance, repair is often overlooked in the planning and design of assistive products and services. There is a need to further incorporate and support these informal contributions as part of the formal provision systems of assistive device.

Cite

Repair strategies for assistive technology in low resource settings

Ben Oldfrey, Cathy Holloway, Julian Walker, Steven McCormack, Bernadette Deere, Laurence Kenney, Robert Ssekitoleko, Helen Ackers & Mark Miodownik (2023) Repair strategies for assistive technology in low resource settings, Disability and Rehabilitation: Assistive Technology, DOI: 10.1080/17483107.2023.2236142

Repair strategies for assistive technology in low resource settings

Image of an empty street in Korea, with vibrant shop signs

Type

Journal Paper

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
Assistive technology in Korea: Findings from the 2017 National Disability Survey

Jamie Danemayer & Myung-Joon Lim

Korea is a rapidly ageing country, with its population over 65 years old increasing from 5% in 1990 to 17% in 2021. Comparatively, the global population over 65 has increased from 6% in 1990 to 9% in 2019 ]. As populations age and functional difficulties become more prevalent, the importance of assistive technology (AT) provision becomes more pronounced. Disparities in access to AT within a population can indicate inequities in healthy aging trajectories that will widen as the overall population ages, if clusters of limited access are not identified and addressed.

Taylor & Francis Online; 2023

Visit publisher

Abstract

Assistive technology in Korea: Findings from the 2017 National Disability Survey

Purpose

Explicitly monitoring the need, use and satisfaction of assistive product (AP) provision is essential to support population health and healthy longevity in ageing/aged countries, like Korea. We present findings from the 2017 Korea National Disability Survey (NDS) on AP access and compare them to international averages, introducing Korea’s data into the wider coherence of global AP research.

Materials and methods

Using data from Korea’s 2017 NDS, surveying 91,405 individuals, we extracted and calculated AP access indicators, including needing, having, using and being satisfied with 76 unique APs, by functional difficulty and product type. We compared satisfaction and unmet need between the National Health Insurance System (NHIS) and alternative provision services.

Results

Prosthetics and orthotics had high rates of under-met need, and lower satisfaction rates, from 46.9% to 80.9%. Mobility APs overall had higher rates of under-met need. There was either low (<5%) or no reported need for most digital/technical APs. Among main products, those provided through the NHIS had lower unmet need (26.4%) than through alternative providers (63.1%), though satisfaction rates were similar (p < .001).

Conclusions

The Korean survey findings align with global averages calculated in the Global Report on Assistive Technology. Low reported needs for certain APs may reflect low awareness about how these products could benefit users, emphasizing the importance of data collection at each stage of the AP provision process. Recommendations to expand access to APs are given for people, personnel, provision, products, and policy.

Implications for rehabilitation

  • Access to assistive products (APs) is an essential part of physical and occupational therapy services and rehabilitation. Monitoring population-level data on disability and AP access can inform policymakers about a key aspect of population health and healthy ageing, and demonstrate the need to expand access by including APs and associated services in primary/universal healthcare packages.
  • Stratifying findings about AP access by type of functional difficulty and further by specific device helps identify the populations for whom needs are not being met. These domain-level and device-level indicators inform efforts to support specific groups within the population of people with disabilities, which has implications for how rehabilitation services are provisioned, targeted and made more accessible.

Cite

Assistive technology in Korea: Findings from the 2017 National Disability Survey

Jamie Danemayer & Myung-Joon Lim (2023)

Assistive technology in Korea: Findings from the 2017 National Disability Survey, Disability and Rehabilitation: Assistive Technology,

DOI: 10.1080/17483107.2023.2225565

Assistive technology in Korea: Findings from the 2017 National Disability Survey

Type

Report

Themes

Assistive & Accessible Technology
Assistive Technology Changes Lives: an assessment of AT need and capacity in England

This report was prepared by Global Disability Innovation (GDI) Hub for the Disability Unit in the Cabinet Office His Majesty’s Government (HMG). The report presents findings from a Country Capacity Assessment (CCA) of AT access in England. Findings illustrate a complex state of AT in England. While delivery systems tend to provide quality products that have a strong, positive impact on people’s lives, processes are often slow and stressful for users and providers alike. Startlingly, there is also an AT access gap of 31% of disabled people not having the assistive products they need to flourish, thrive, or even participate in daily life.

The Cabinet Office; 2023

Download

Abstract

Assistive Technology Changes Lives: an assessment of AT need and capacity in England

The aim of this research was to undertake a Country Capacity Assessment (CCA) to inform a more integrated approach to Assistive Technology (AT) provision in England. The results aim to support policymakers in identifying actions to strengthen service delivery to better meet disabled people’s needs, improving outcomes for AT users and reducing inefficiencies in the current approach.

The research was undertaken from November 2022 to March 2023 and led by the Global Disability Innovation (GDI) Hub, which is the World Health Organization (WHO) Global Collaborating Centre on AT access, using WHO tools in the Assistive Technology Assessment (ATA) suite.

Cite

Assistive Technology Changes Lives: an assessment of AT need and capacity in England

Suggested Citation: Austin, V, Patel, D, Danemayer, J, Mattick, K, Landre, A, Smitova, M, Bandukda, M, Healy, A, Chockalingam, N, Bell D, and Holloway, C; Assistive Technology Changes Lives: an assessment of AT need and capacity in England; Cabinet Office, HMG; 2023

Assistive Technology Changes Lives: an assessment of AT need and capacity in England

Type

Journal Paper

Themes

Assistive & Accessible Technology
Seeking information about assistive technology: Exploring current practices, challenges, and the need for smarter systems

Jamie Danemayer, Cathy Holloway, Youngjun Cho, Nadia Berthouze, Aneesha Singh, William Bhot, Ollie Dixon, Marko Grobelnik, John Shawe-Taylor

Paper highlights: Assistive technology (AT) information networks are insular among stakeholder groups, causing unequal access to information. Participants often cited fragmented international marketplaces as a barrier and valued info-sharing across industries. Current searches produce biased results in marketplaces influenced by commercial interests and high-income contexts. Smart features could facilitate searching, update centralised data sources, and disseminate information more inclusively.

International Journal of Human-Computer Studies; 2023

Visit publisher

Abstract

Seeking information about assistive technology: Exploring current practices, challenges, and the need for smarter systems

Ninety percent of the 1.2 billion people who need assistive technology (AT) do not have access. Information seeking practices directly impact the ability of AT producers, procurers, and providers (AT professionals) to match a user's needs with appropriate AT, yet the AT marketplace is interdisciplinary and fragmented, complicating information seeking. We explored common limitations experienced by AT professionals when searching information to develop solutions for a diversity of users with multi-faceted needs. Through Template Analysis of 22 expert interviews, we find current search engines do not yield the necessary information, or appropriately tailor search results, impacting individuals’ awareness of products and subsequently their availability and the overall effectiveness of AT provision. We present value-based design implications to improve functionality of future AT-information seeking platforms, through incorporating smarter systems to support decision-making and need-matching whilst ensuring ethical standards for disability fairness remain.

Seeking information about assistive technology: Exploring current practices, challenges, and the need for smarter systems

Kenyan man holding a prosthesis

Type

Journal Paper

Themes

Assistive & Accessible Technology
Evaluating the use of a thermoplastic socket in Kenya: A pilot study

Giulia Barbareschi, Wesley Teerlink, Josepg Gakunga Njuguna, Purity Musungu, Mary Dama Kirino, and Catherine Holloway

According to estimates from the World Health Organization, in 2010, there were more than 30 million people in need of prosthetic and orthotic devices across Africa, Asia, and Latin America.1 This number is likely to have grown significantly in the past decade, in line with trends recorded for the general need of assistive technology.2 For many people who undergo a lower limb amputation, access to an appropriate prosthesis is essential to restore functional mobility and ensure good quality of life.3 Ultimately, an appropriate lower-limb prosthesis (LLP) can enable people with amputation to fulfill their desired role in their family, work, and community life.4

Prosthetic and Orthotics International; 2022

Visit publisher

Abstract

Evaluating the use of a thermoplastic socket in Kenya: A pilot study

Background:

Many people with amputations who live in low-resourced settings struggle to access the workshops where qualified prosthetists provide appropriate care. Novel technologies such as the thermoplastic Confidence Socket are emerging, which could help facilitate easier access to prosthetic services.

Objectives:

The objective of this study was to evaluate the satisfaction and the performance of transtibial prosthesis featuring the Confidence Socket.

Study design:

This is a longitudinal repeated-measures design study.

Methods:

A convenience sample of 26 participants who underwent transtibial amputation were fitted with the Confidence Socket. The performance of the socket was evaluated after a follow-up period between 1 month and 6 months using the L test of functional mobility and the amputee mobility predictor. Satisfaction with the prosthesis was measured using the Trinity Amputation and Prosthetic Experience Scales and purposefully designed 7-point Likert scales.

Results:

Ten of the 26 participants returned for follow-up. Perceived activity restriction and L test times improved significantly at follow-up, but the self-reported satisfaction with the Confidence Socket was lower at follow-up compared with that after fitting.

Conclusions:

The Amparo Confidence Socket represents a potentially viable alternative to improve access to appropriate prosthesis in Kenya, but some aspects of users’ self-reported satisfaction should be further investigated.

Cite

Evaluating the use of a thermoplastic socket in Kenya: A pilot study

Barbareschi G, Teerlink W, Njuguna JG, Musungu P, Kirino MD, Holloway C. Evaluating the use of a thermoplastic socket in Kenya: A pilot study. Prosthet Orthot Int. 2022 Oct 1;46(5):532-537. doi: 10.1097/PXR.0000000000000130. Epub 2022 Mar 25. PMID: 35333813; PMCID: PMC9554758.

Evaluating the use of a thermoplastic socket in Kenya: A pilot study

""

Type

Journal Paper

Themes

Assistive & Accessible Technology
Responding to the coronavirus disease-2019 pandemic with innovative data use: The role of data challenges

Jamie Danemayer, Andrew Young, Siobhan Green, Lydia Ezenwa, Michael Klein

This study synthesizes learnings from three distinct datasets: innovator applications to the COVIDaction data challenges, surveys from organizers from similarly-aimed data challenges, and a focus group discussion with professionals who work with COVID-19 data. Thematic and topic analyses were used to analyze these datasets with the aim to identify gaps and barriers to effective data use in responding to the pandemic.

Data & Policy; 2023

Visit publisher

Abstract

Responding to the coronavirus disease-2019 pandemic with innovative data use: The role of data challenges

Innovative, responsible data use is a critical need in the global response to the coronavirus disease-2019 (COVID-19) pandemic. Yet potentially impactful data are often unavailable to those who could utilize it, particularly in data-poor settings, posing a serious barrier to effective pandemic mitigation. Data challenges, a public call-to-action for innovative data use projects, can identify and address these specific barriers. To understand gaps and progress relevant to effective data use in this context, this study thematically analyses three sets of qualitative data focused on/based in low/middle-income countries: (a) a survey of innovators responding to a data challenge, (b) a survey of organizers of data challenges, and (c) a focus group discussion with professionals using COVID-19 data for evidence-based decision-making. Data quality and accessibility and human resources/institutional capacity were frequently reported limitations to effective data use among innovators. New fit-for-purpose tools and the expansion of partnerships were the most frequently noted areas of progress. Discussion participants identified building capacity for external/national actors to understand the needs of local communities can address a lack of partnerships while de-siloing information. A synthesis of themes demonstrated that gaps, progress, and needs commonly identified by these groups are relevant beyond COVID-19, highlighting the importance of a healthy data ecosystem to address emerging threats. This is supported by data holders prioritizing the availability and accessibility of their data without causing harm; funders and policymakers committed to integrating innovations with existing physical, data, and policy infrastructure; and innovators designing sustainable, multi-use solutions based on principles of good data governance.

Cite

Responding to the coronavirus disease-2019 pandemic with innovative data use: The role of data challenges

Danemayer, J., Young, A., Green, S., Ezenwa, L., & Klein, M. (2023). Responding to the coronavirus disease-2019 pandemic with innovative data use: The role of data challenges. Data & Policy, 5, E11. doi:10.1017/dap.2023.6

Responding to the coronavirus disease-2019 pandemic with innovative data use: The role of data challenges

""

Type

Conference Paper

Themes

Assistive & Accessible Technology
Culture and Participation
The Social Network: How People with Visual Impairment use Mobile Phones in Kibera, Kenya

Giulia Barbareschi, Catherine Holloway, Katherine Arnold, Grace Magomere, Wycliffe Ambeyi Wetende, Gabriel Ngare, Joyce Olenja

We present the findings of a case study of mobile technology use by People with Visual Impairment (VIPs) in Kibera, an informal settlement in Nairobi. We used contextual interviews, ethnographic observations and a co-design workshop to explore how VIPs use mobile phones in their daily lives, and how this use influences the social infrastructure of VIPs. Our findings suggest that mobile technology supports and shapes the creation of social infrastructure. However, this is only made possible through the existing support networks of the VIPs, which are mediated through four types of interaction: direct, supported, dependent and restricted.

CHI '20: Proceedings of the 2020 CHI Conference; 2020

Visit publisher

Abstract

The Social Network: How People with Visual Impairment use Mobile Phones in Kibera, Kenya

Living in an informal settlement with a visual impairment can be very challenging resulting in social exclusion. Mobile phones have been shown to be hugely beneficial to people with sight loss in formal and high-income settings. However, little is known about whether these results hold true for people with visual impairment (VIPs) in informal settlements. We present the findings of a case study of mobile technology use by VIPs in Kibera, an informal settlement in Nairobi. We used contextual interviews, ethnographic observations and a co-design workshop to explore how VIPs use mobile phones in their daily lives, and how this use influences the social infrastructure of VIPs. Our findings suggest that mobile technology supports and shapes the creation of social infrastructure. However, this is only made possible through the existing support networks of the VIPs, which are mediated through four types of interaction: direct, supported, dependent and restricted.

Cite

The Social Network: How People with Visual Impairment use Mobile Phones in Kibera, Kenya

Giulia Barbareschi, Catherine Holloway, Katherine Arnold, Grace Magomere, Wycliffe Ambeyi Wetende, Gabriel Ngare, and Joyce Olenja. 2020. The Social Network: How People with Visual Impairment use Mobile Phones in Kibera, Kenya. In Proceedings of the 2020 CHI Conference on Human Factors in Computing Systems (CHI '20). Association for Computing Machinery, New York, NY, USA, 1–15. https://doi.org/10.1145/331383...

The Social Network: How People with Visual Impairment use Mobile Phones in Kibera, Kenya

A young child holds a ball and looks up to an older child who is using a wheelchair. They are smiling at each other playfully

Type

Editorial

Themes

Culture and Participation
COVID-19 as social disability: the opportunity of social empathy for empowerment

Ikenna D Ebueny, Emma M Smith, Catherine Holloway, Rune Jensen, Lucía D'Arino, Malcolm MacLachlan

Social empathy is ‘the ability to more deeply understand people by perceiving or experiencing their life situations and as a result gain insight into structural inequalities and disparities’. Social empathy comprises three elements: individual empathy, contextual understanding and social responsibility. COVID-19 has created a population-wide experience of exclusion that is only usually experienced by subgroups of the general population. Notably, persons with disability, in their everyday lives, commonly experience many of the phenomena that have only recently been experienced by members of the general population. COVID-19 has conferred new experiential knowledge
on all of us. We have a rare opportunity to understand and better the lives of persons with disabilities for whom some aspects of the COVID- 19 experience are enduring. This allows us greater understanding of the importance of implementing in full a social and human rights model of disability, as outlined in the UNCRPD.

BMJ Global Health; 2020

Visit publisher

Abstract

COVID-19 as social disability: the opportunity of social empathy for empowerment

  • COVID-19 has conferred new experiential knowledge on society and a rare opportunity to better understand the social model of disability and to improve the lives of persons with disabilities.
  • The COVID-19 experience may offer contextual knowledge of the prepandemic lives of persons with disabilities and foster greater social awareness, responsibility and opportunities for change towards a more inclusive society.
  • Information, family and social relationships, health protection and healthcare, education, transport and employment should be accessible for all groups of the population. The means must be developed and deployed to ensure equity – the deployment of resources so that people with different types of needs have the same opportunities for living good lives in inclusive communities.
  • We have learnt from COVID-19 that inclusive healthcare and universal access should be the new normal, that its provision as a social good is both unifying and empowering for society as a whole.

Cite

COVID-19 as social disability: the opportunity of social empathy for empowerment

Ebuenyi ID, Smith EM, Holloway C, et alCOVID-19 as social disability: the opportunity of social empathy for empowermentBMJ Global Health 2020;5:e003039.

COVID-19 as social disability: the opportunity of social empathy for empowerment

A woman wearing a mask, testing her hearing using an app and headphones

Type

Editorial

Themes

Assistive & Accessible Technology

Research Group

Social Justice
Developing inclusive and resilient systems: COVID-19 and assistive technology

Emma M. Smith, Malcolm MacLachlan, Ikenna D. Ebuenyi, Catherine Holloway & Victoria Austin

While the inadequacies of our existing assistive technology systems, policies, and services have been highlighted by the acute and rapidly changing nature of the COVID-19 pandemic, these failures are also present and important during non-crisis times. Each of these actions, taken together, will not only address needs for more robust and resilient systems for future crises, but also the day-to-day needs of all assistive technology users. We have a responsibility as a global community, and within our respective countries, to address these inadequacies now to ensure an inclusive future.

Disability & Society; 2020

Visit publisher

Abstract

Developing inclusive and resilient systems: COVID-19 and assistive technology

Assistive technology is a critical component of maintaining health, wellbeing, and the realization of rights for persons with disabilities. Assistive technologies, and their associated services, are also paramount to ensuring individuals with functional limitations have access to important health and social service information, particularly during a pandemic where they may be at higher risk than the general population. Social isolation and physical distancing have further marginalized many within this population. We have an opportunity to learn from the COVID-19response to develop more inclusive and resilient systems that will serve people with disabilities more effectively in the future. In this Current Issues piece, we present a starting point for discussion, based on our experiences working to promote access to assistive technologies through inclusive and sustainable systems and policies.

Cite

Developing inclusive and resilient systems: COVID-19 and assistive technology

Emma M. Smith, Malcolm MacLachlan, Ikenna D. Ebuenyi, Catherine Holloway & Victoria Austin (2021) Developing inclusive and resilient systems: COVID-19 and assistive technology, Disability & Society, 36:1, 151-154, DOI: 10.1080/09687599.2020.1829558

Developing inclusive and resilient systems: COVID-19 and assistive technology

Type

Conference Paper
Disability design and innovation in computing research in low resource settings

Dafne Zuleima Morgado-Ramirez, Giulia Barbareschi, Maggie Kate Donovan-Hall, Mohammad Sobuh, Nida' Elayyan, Brenda T Nakandi, Robert Tamale Ssekitoleko, joyce Olenja, Grace Nyachomba Magomere, Sibylle Daymond, Jake Honeywill, Ian Harris, Nancy Mbugua, Laurence Kenney, Catherine Holloway

80% of people with disabilities worldwide live in low resourced settings, rural areas, informal settlements and in multidimensional poverty. ICT4D leverages technological innovations to deliver programs for international development. But very few do so with a focus on and involving people with disabilities in low resource settings. Also, most studies largely focus on publishing the results of the research with a focus on the positive stories and not the learnings and recommendations regarding research processes.

ASSETS '20: Proceedings of the 22nd International ACM SIGACCESS Conference on Computers and Accessibility; 2020

Visit publisher

Abstract

Disability design and innovation in computing research in low resource settings

80% of people with disabilities worldwide live in low resourced settings, rural areas, informal settlements and in multidimensional poverty. ICT4D leverages technological innovations to deliver programs for international development. But very few do so with a focus on and involving people with disabilities in low resource settings. Also, most studies largely focus on publishing the results of the research with a focus on the positive stories and not the learnings and recommendations regarding research processes. In short, researchers rarely examine what was challenging in the process of collaboration. We present reflections from the field across four studies. Our contributions are: (1) an overview of past work in computing with a focus on disability in low resource settings and (2) learnings and recommendations from four collaborative projects in Uganda, Jordan and Kenya over the last two years, that are relevant for future HCI studies in low resource settings with communities with disabilities. We do this through a lens of Disability Interaction and ICT4D.

Cite

Disability design and innovation in computing research in low resource settings

Dafne Zuleima Morgado-Ramirez, Giulia Barbareschi, Maggie Kate Donovan-Hall, Mohammad Sobuh, Nida' Elayyan, Brenda T Nakandi, Robert Tamale Ssekitoleko, joyce Olenja, Grace Nyachomba Magomere, Sibylle Daymond, Jake Honeywill, Ian Harris, Nancy Mbugua, Laurence Kenney, and Catherine Holloway. 2020. Disability design and innovation in computing research in low resource settings. In Proceedings of the 22nd International ACM SIGACCESS Conference on Computers and Accessibility (ASSETS '20). Association for Computing Machinery, New York, NY, USA, Article 11, 1–7. https://doi.org/10.1145/337362...

Disability design and innovation in computing research in low resource settings

newspaper cuttings from covid 19

Type

Journal Paper

Themes

Assistive & Accessible Technology
Assistive Technology Use and Provision During COVID19: Results From a Rapid Global Survey

Emma M Smith, Maria Luisa Toro Hernandez, Ikenna D Ebuenyi, Elena V Syurina, Giulia Barbareschi, Krista L Best, Jamie Danemayer, Ben Oldfrey, Nuha Ibrahim, Catherine Holloway, Malcolm MacLachlan

The coronavirus disease 2019 (COVID-19) pandemic has impacted all segments of society, but it has posed particular challenges for the inclusion of persons with disabilities, those with chronic illness and older people regarding their participation in daily life. These groups often benefit from assistive technology (AT) and so it is important to understand how use of AT may be affected by or may help to mitigate the impacts of COVID-19. Objective: The objectives of this study were to explore the how AT use and provision have been affected during the initial stages of the COVID-19 pandemic, and how AT policies and systems may be made more resilient based on lessons learned during this global crisis.

International Journal of Health Policy and Management; 2020

Visit publisher

Abstract

Assistive Technology Use and Provision During COVID19: Results From a Rapid Global Survey

Abstract

Background: The coronavirus disease 2019 (COVID-19) pandemic has impacted all segments of society, but it has posed particular challenges for the inclusion of persons with disabilities, those with chronic illness and older people regarding their participation in daily life. These groups often benefit from assistive technology (AT) and so it is important to understand how use of AT may be affected by or may help to mitigate the impacts of COVID-19. Objective: The objectives of this study were to explore the how AT use and provision have been affected during the initial stages of the COVID-19 pandemic, and how AT policies and systems may be made more resilient based on lessons learned during this global crisis.

Methods: This study was a rapid, international online qualitative survey in the 6 United Nations (UN) languages (English, French, Spanish, Russian, Arabic, Mandarin Chinese) facilitated by extant World Health Organization (WHO) and International Disability Alliance networks. Themes and subthemes of the qualitative responses were identified using Braun and Clarke's 6-phase analysis.

Results: Four primary themes were identified in in the data: Disruption of Services, Insufficient Emergency Preparedness, Limitations in Existing Technology, and Inadequate Policies and Systems. Subthemes were identified within each theme, including subthemes related to developing resilience in AT systems, based on learning from the pandemic.

Conclusion: COVID-19 has disrupted the delivery of AT services, primarily due to infection control measures resulting in lack of provider availability and diminished one-to-one services. This study identified a need for stronger user-centred development of funding policies and infrastructures that are more sustainable and resilient, best practices for remote service delivery, robust and accessible tools and systems, and increased capacity of clients, caregivers, and clinicians to respond to pandemic and other crisis situations.

Cite

Assistive Technology Use and Provision During COVID19: Results From a Rapid Global Survey

Smith EM, Toro Hernandez ML, Ebuenyi ID, Syurina EV, Barbareschi G, Best KL, Danemayer J, Oldfrey B, Ibrahim N, Holloway C, MacLachlan M. Assistive Technology Use and Provision During COVID-19: Results From a Rapid Global Survey. Int J Health Policy Manag. 2022 Jun 1;11(6):747-756. doi: 10.34172/ijhpm.2020.210. PMID: 33201656;

Assistive Technology Use and Provision During COVID19: Results From a Rapid Global Survey

Type

Editorial

Research Group

Social Justice
Assistive Technology (AT), for What?

This year (2022) has seen the publication of the World’s first Global Report on Assistive Technology (GReAT) [1]. This completes almost a decade of work to ensure assistive technology (AT) access is a core development issue. The lack of access to assistive products (APs), such as wheelchairs, hearing aids, and eyeglasses, as well as less well-referenced products such as incontinence pads, mobile phone applications, or walking sticks, affects as many as 2.5 billion people globally. Furthermore, the provision of APs would reap a 1:9 return on investment [2]. This could result in a family in need netting (or living without) over GBP 100,000 in their lifetime [2] or more, if we count dynamic overspills in the economy such as employment of assistive technology services and manufacturing of devices [3].

Societies; 2021

Visit publisher

Abstract

Assistive Technology (AT), for What?

Amartya Sen’s seminal Tanner lecture: Equality of What? began a contestation on social justice and human wellbeing that saw a new human development paradigm emerge—the capability approach (CA)—which has been influential ever since. Following interviews with leading global assistive technology (AT) stakeholders, and users, this paper takes inspiration from Sen’s core question and posits, AT for what? arguing that AT should be understood as a mechanism to achieve the things that AT users’ value. Significantly, our research found no commonly agreed operational global framework for (disability) justice within which leading AT stakeholders were operating. Instead, actors were loosely aligned through funding priorities and the CRPD. We suggest that this raises the possibility for (welcome and needed) incoming actors to diverge from efficiently designed collective action, due to perverse incentives enabled by unanchored interventions. The Global Report on Assistive Technology (GReAT) helps, greatly! However, we find there are still vital gaps in coordination; as technology advances, and AT proliferates, no longer can the device-plus-service approach suffice. Rather, those of us interested in human flourishing might explore locating AT access within an operational global framework for disability justice, which recognizes AT as a mechanism to achieve broader aims, linked to people’s capabilities to choose what they can do and be.

Cite

Assistive Technology (AT), for What?

Austin, V.; Holloway, C. Assistive Technology (AT), for What? Societies 2022, 12, 169. https://doi.org/10.3390/soc120...

Assistive Technology (AT), for What?

Type

Journal Paper

Themes

Assistive & Accessible Technology
Applying market shaping approaches to increase access to assistive technology in low- and middle-income countries

Margaret Savage, Sarah Albala, Frederic Seghers, Rainer Katte, Cynthia Liao, Mathilde Chaudron, Novia Afdhila

Development outcomes are inextricably linked to the health of the marketplace that delivers products and services to people in low- and middle- income countries (LMIC). Shortcomings in the market for assistive technology (AT) contribute to low access in LMIC. Market shaping is aimed at improving a market’s specific outcomes, such as access to high quality, affordable AT, by targeting the root causes of these shortcomings. The paper summarizes the findings of a market and sector analysis that was conducted under the UK aid funded AT2030 programme and aims to discuss how market shaping can help more people gain access to the AT that they need and what are the best mechanisms to unlock markets and commercial opportunity in LMICs.

Assistive Technology The Official Journal of RESNA; 2021

Visit publisher

Abstract

Applying market shaping approaches to increase access to assistive technology in low- and middle-income countries

Development outcomes are inextricably linked to the health of the marketplace that delivers products and services to people in low- and middle-income countries (LMIC). Shortcomings in the market for assistive technology (AT) contribute to low access in LMIC. Market shaping is aimed at improving a market’s specific outcomes, such as access to high quality, affordable AT, by targeting the root causes of these shortcomings. The paper summarizes the findings of market analyses conducted under the UK aid funded AT2030 programme in support of ATscale and aims to discuss how market shaping can help more people gain access to the AT that they need and what are the best mechanisms to unlock markets and commercial opportunity in LMICs. The paper also explores how market shaping for AT markets could be part of a mission-oriented approach AT policy. A mission-oriented approach can help accelerate progress toward a common objective among stakeholders, at country or global level. While market-shaping activities direct the outcomes of the market toward a specific end goal, such as access to quality, affordable products and services, missions are more comprehensive and include other policy interventions and stakeholder collaborations in order to create a robust and sustainable structure.

Cite

Applying market shaping approaches to increase access to assistive technology in low- and middle-income countries

Margaret Savage, Sarah Albala, Frederic Seghers, Rainer Kattel, Cynthia Liao, Mathilde Chaudron & Novia Afdhila (2021) Applying market shaping approaches to increase access to assistive technology in low- and middle-income countries, Assistive Technology, 33:sup1, 124-135, DOI: 10.1080/10400435.2021.1991050

Applying market shaping approaches to increase access to assistive technology in low- and middle-income countries

Female in a wheelchair carrying a water bottle in an informal settlement. Kid walking in the back.

Type

Journal Paper

Themes

Assistive & Accessible Technology
Assistive technology access in longitudinal datasets: a global review

Jamie Danemayer, Sophie Mitra, Cathy Holloway, Shereen Hussein

A person’s access to assistive products such as hearing aids, wheelchairs, and glasses, is an essential part of their ability to age in a healthy way. But, according to the World Health Organization, a staggering 90% of people who need assistive products worldwide, do not have access to them. In many instances access is limited or simply non-existent. This is often due to assistive products being too expensive, demand outweighing supply, not always being suitable to use in different environments, or even the lack of availability of trained providers. In such circumstances, people are more likely to age ‘unhealthily’ if they do not have access to assistive products that are designed to support their day to day functioning and independence.

International Journal of Population Data Science; 2023

Visit publisher

Abstract

Assistive technology access in longitudinal datasets: a global review

Functional limitations become more prevalent as populations age, emphasising an increasingly urgent need for assistive technology (AT). Critical to meeting this need trajectory is understanding AT access in older ages. Yet few publications examine this from a longitudinal perspective.

This review aims to identify and collate what data exist globally, seeking all population-based cohorts and repeated cross-sectional surveys through the Maelstrom Research Catalogue (searched May 10, 2022) and the Disability Data Report (published 2022), respectively. Datasets incorporating functional limitations modules and question(s) dedicated to AT, with a wave of data collection since 2009, were included.

Of 81 cohorts and 202 surveys identified, 47 and 62 meet inclusion criteria, respectively. Over 40% of cohorts were drawn from high-income countries which have already experienced significant population ageing. Cohorts often exclude participants based on pre-existing support needs. For surveys, Africa is the most represented region (40%). Globally, 73% of waves were conducted since 2016. 'Use' is the most collected AT access indicator (69% of cohorts and 85% of surveys). Glasses (78%) and hearing aids (77%) are the most represented AT. While gaps in data coverage and representation are significant, collating existing datasets highlights current opportunities for analyses and methods for improving data collection across the sector.

Cite

Assistive technology access in longitudinal datasets: a global review

Danemayer, J., Mitra, S., Holloway, C. and Hussein, S. (2023) “Assistive technology access in longitudinal datasets: a global review”, International Journal of Population Data Science, 8(1). doi: 10.23889/ijpds.v8i1.1901.

Assistive technology access in longitudinal datasets: a global review

An older man fits his own hearing aid

Type

Journal Paper

Themes

Assistive & Accessible Technology
Estimating need and coverage for five priority assistive products: A systematic review of global population based research

Jamie Danemayer, Dorothy Boggs, Vinicius Delgado Ramos, Emma M. Smith, Ariana Kular, William Bhot, Felipe Ramos Barajas, Sarah Polack, Catherine Holloway

Assistive technology (AT) includes assistive products (APs) and related services that can improve health and well-being, enable increased independence and foster participation for people with functional difficulties, including older adults and people with impairments or chronic health conditions.1 This paper uses the umbrella term ‘functional difficulty’ (FD) to refer to all of these groups. This systematic review was undertaken to identify studies presenting population-based estimates of need and coverage for five APs (hearing aids, limb prostheses, wheelchairs, glasses and personal digital assistants) grouped by four functional domains (hearing, mobility, vision and cognition).

BMJ Global Health; 2021

Visit publisher

Abstract

Estimating need and coverage for five priority assistive products: A systematic review of global population based research

Introduction: To improve access to assistive products (APs) globally, data must be available to inform evidence based decision-making, policy development and evaluation, and market-shaping interventions.

Methods: This systematic review was undertaken to identify studies presenting population-based estimates of need and coverage for five APs (hearing aids, limb prostheses, wheelchairs, glasses and personal digital assistants) grouped by four functional domains (hearing, mobility, vision and cognition).

Results: Data including 656 AP access indicators were extracted from 207 studies, most of which (n=199, 96%) were cross-sectional, either collecting primary (n=167) or using secondary (n=32) data. There was considerable heterogeneity in assessment approaches used and how AP indicators were reported; over half (n=110) used a combination of clinical and self-reported assessment data. Of 35 studies reporting AP use out of all people with functional difficulty in the corresponding functional domains, the proportions ranged from 4.5% to 47.0% for hearing aids, from 0.9% to 17.6% for mobility devices, and from 0.1% to 86.6% for near and distance glasses. Studies reporting AP need indicators demonstrated >60% unmet need for each of the five APs in most settings.

Conclusion: Variation in definitions of indicators of AP access have likely led to overestimates/underestimates of need and coverage, particularly, where the relationship between functioning difficulty and the need for an AP is complex. This review demonstrates high unmet need for APs globally, due in part to disparate data across this sector, and emphasises the need to standardise AP data collection and reporting strategies to provide a comparable evidence base to improve access to APs.

Cite

Estimating need and coverage for five priority assistive products: A systematic review of global population based research

Danemayer J, Boggs D, Delgado Ramos V, et al. Estimating need and coverage for five priority assistive products: a systematic review of global population-based research. BMJ Global Health 2022;7:e007662. doi:10.1136/bmjgh-2021-007662

Estimating need and coverage for five priority assistive products: A systematic review of global population based research

Type

Workshop

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
Could AI Democratise Education? Socio-Technical Imaginaries of an EdTech Revolution

Sahan Bulathwela, María Pérez-Ortiz, Catherine Holloway, John Shawe-Taylor

This paper starts by synthesising how AI might change how we learn and teach, focusing specifically on the case of personalised learning companions, and then move to discuss some socio-technical features that will be crucial for avoiding the perils of these AI systems worldwide (and perhaps ensuring their success). This paper also discusses the potential of using AI together with free, participatory and democratic resources, such as Wikipedia, Open Educational Resources and open-source tools. We also emphasise the need for collectively designing human-centered, transparent, interactive and collaborative AI-based algorithms that empower and give complete agency to stakeholders, as well as support new emerging pedagogies.

Workshop on Machine Learning for the Developing World (ML4D) at the Conference on Neural Information Processing Systems 2021; 2021

Visit publisher

Abstract

Could AI Democratise Education? Socio-Technical Imaginaries of an EdTech Revolution

Artificial Intelligence (AI) in Education has been said to have the potential for building more personalised curricula, as well as democratising education worldwide and creating a Renaissance of new ways of teaching and learning. Millions of students are already starting to benefit from the use of these technologies, but millions more around the world are not. If this trend continues, the first delivery of AI in Education could be greater educational inequality, along with a global misallocation of educational resources motivated by the current technological determinism narrative. In this paper, we focus on speculating and posing questions around the future of AI in Education, with the aim of starting the pressing conversation that would set the right foundations for the new generation of education that is permeated by technology. This paper starts by synthesising how AI might change how we learn and teach, focusing specifically on the case of personalised learning companions, and then move to discuss some socio-technical features that will be crucial for avoiding the perils of these AI systems worldwide (and perhaps ensuring their success). This paper also discusses the potential of using AI together with free, participatory and democratic resources, such as Wikipedia, Open Educational Resources and open-source tools. We also emphasise the need for collectively designing human-centered, transparent, interactive and collaborative AI-based algorithms that empower and give complete agency to stakeholders, as well as support new emerging pedagogies. Finally, we ask what would it take for this educational revolution to provide egalitarian and empowering access to education, beyond any political, cultural, language, geographical and learning ability barriers.

Could AI Democratise Education? Socio-Technical Imaginaries of an EdTech Revolution

""

Type

Workshop

Themes

Assistive & Accessible Technology
Towards Proactive Information Retrieval in Noisy Text with Wikipedia Concepts

Tabish Ahmed, Sahan Bulathwela

The informational needs of people are highly contextual and can depend on many different factors such as their current knowledge state, interests and goals [1, 2, 3]. However, an effective information retrieval companion should minimise the human effort required in i) expressing a human information need and ii) navigating a lengthy result set. Using topical representations of the user history (e.g. [4]) can immensely help formulating zero shot queries and refining short user queries that enable proactive information retrieval (IR). While the world has digital textual information in abundance, it can often be noisy (e.g. extracted through Automatic Speech Recognition (ASR), PDF text extraction etc.), leading to state-of-the-art neural models being highly sensitive to the noise producing sub-optimal results [5]. This demands denoising steps to refine both query and document representation. In this paper, we argue that Wikipedia, an openly available encyclopedia, can be a humanly intuitive knowledge base [6] that has the potential to provide the world view many noisy information Retrieval systems need.

Published at the First Workshop on Proactive and Agent-Supported Information Retrieval at CIKM 2022; 2022

Visit publisher

Abstract

Towards Proactive Information Retrieval in Noisy Text with Wikipedia Concepts

Extracting useful information from the user history to clearly understand informational needs is a crucial feature of a proactive information retrieval system. Regarding understanding information and relevance, Wikipedia can provide the background knowledge that an intelligent system needs. This work explores how exploiting the context of a query using Wikipedia concepts can improve proactive information retrieval on noisy text. We formulate two models that use entity linking to associate Wikipedia topics with the relevance model. Our experiments around a podcast segment retrieval task demonstrate that there is a clear signal of relevance in Wikipedia concepts while a ranking model can improve precision by incorporating them. We also find Wikifying the background context of a query can help disambiguate the meaning of the query, further helping proactive information retrieval.

Towards Proactive Information Retrieval in Noisy Text with Wikipedia Concepts

A man trials a lower limb prosthetic in parallel bars

Type

Journal Paper

Themes

Assistive & Accessible Technology
Experiences of lower limb prosthesis users in Kenya: a qualitative study to understand motivation to use and satisfaction with prosthetic outcomes

Kate Mattick, Ben Oldfrey, Maggie Donovan-Hall, Grace Magomere, Joseph Gakunga, Catherine Holloway

An estimated 1.5 million people undergo limb amputation each year [1]. Low- and middle-income countries (LMICs) are projected to have a rapid increase in people living with an amputation in the coming years due to prevalence of non-communicable dis-ease, trauma and conflict [1–3]. This paper explores the personal and system factors that motivate and enhance outcomes for patients accessing a prosthetic service and using a lower-limb prosthesis within a low resource setting.

Disability and Rehabilitation; 2022

Visit publisher

Abstract

Experiences of lower limb prosthesis users in Kenya: a qualitative study to understand motivation to use and satisfaction with prosthetic outcomes

Purpose
To explore the personal and system factors that motivate and enhance outcomes for patients accessing a prosthetic service and using a lower-limb prosthesis within a low resource setting.

Materials and methods
This study employed a qualitative approach to explore the motivations and satisfaction of individuals with lower limb loss engaging with a prosthetic service in Mombasa, Kenya. In-depth interviews were conducted over Microsoft Teams with 10 lower limb prosthesis users and thematic analysis was applied.

Results
Five key themes emerged: acceptance, self-determination, hope, clinician relationship and perception. These findings demonstrate the importance of hopeful thinking and a supportive community in overcoming physical and stigmatising challenges. The findings further highlight the value of the service provider relationship beyond just prescribing an assistive device.

Conclusion
These results have relevance in developing patient-centred services, assistive devices and personnel training that are responsive, motivating, and cognisant of the service user. This is of particular interest as assistive technology services are newly developed in low resource settings.

Cite

Experiences of lower limb prosthesis users in Kenya: a qualitative study to understand motivation to use and satisfaction with prosthetic outcomes

Kate Mattick, Ben Oldfrey, Maggie Donovan-Hall, Grace Magomere, Joseph Gakunga & Catherine Holloway (2022) Experiences of lower limb prosthesis users in Kenya: a qualitative study to understand motivation to use and satisfaction with prosthetic outcomes, Disability and Rehabilitation, DOI: 10.1080/09638288.2022.2152875

Experiences of lower limb prosthesis users in Kenya: a qualitative study to understand motivation to use and satisfaction with prosthetic outcomes

Colour photograph of Daniel wearing a white checked shirt and sitting at a desk facing the camera

Type

Article

Themes

Assistive & Accessible Technology
These tools help visually impaired scientists read data and journals

This article was featured in Nature and discusses tools that help visually impaired scientists read data and Journals. Innovation Manager, Daniel Hajas, was interviewed as part of this piece and highlights the need for an ecosystem approach, and access to data / visualisations for blind members of the research and science community.

Nature; 2023

These tools help visually impaired scientists read data and journals

Vicki interviewing a female wheelchair user in Sierra Leone. .

Type

Journal Paper

Themes

Culture and Participation

Research Group

Social Justice
“Give Us the Chance to Be Part of You, We Want Our Voices to Be Heard”: Assistive Technology as a Mediator of Participation in (Formal and Informal) Citizenship Activities for Persons with Disabilities Who Are Slum Dwellers in Freetown, Sierra Leone

Victoria Austin, Catherine Holloway, Ignacia Ossul Vermehren, Abs Dumbuya, Giulia Barbareschi and Julian Walker

The World Health Organisation (WHO) estimates that there are currently one billion people in the world who need access to assistive technology (AT). Yet over 90% currently do not have access to assistive products (AP)—such as wheelchairs, hearing aids, walking sticks and eyeglasses—they need, nor and the systems and services necessary to support their appropriate provision [1]. This shocking deficit is set to double by 2050, with about two billion of us likely to require AT but no anticipated reduction in lack of access. The World Health Organisation defines AT as the “the umbrella term covering the systems and services related to the delivery of assistive products and services”, which are products that “maintain or improve an individual’s functioning and independence, thereby promoting their well-being” [2], and the importance of AT provision is strongly highlighted in the Convention on the Rights of Persons with Disabilities (CRPD) [3]. AT has also been shown to be essential to achieving many of the United Nation’s Sustainable Development Goals (SDG) [4]. Without access to AT, many persons with disabilities are unable to go to school, be active in their communities, earn an income, or play a full role in their families [5]. As a recent study found, “AT can make the impossible possible for people living with a wide range of impairments, but a lack of access to basic AT …excludes individuals and reduces their ability to live full, enjoyable, and independent lives” [6].

International Journal of Environmental Research and Public Health; 2021

Visit publisher

Abstract

“Give Us the Chance to Be Part of You, We Want Our Voices to Be Heard”: Assistive Technology as a Mediator of Participation in (Formal and Informal) Citizenship Activities for Persons with Disabilities Who Are Slum Dwellers in Freetown, Sierra Leone

The importance of assistive technology (AT) is gaining recognition, with the World Health Organisation (WHO) set to publish a Global Report in 2022. Yet little is understood about access for the poorest, or the potential of AT to enable this group to participate in the activities of citizenship; both formal and informal. The aim of this qualitative study was to explore AT as mediator of participation in citizenship for persons with disabilities who live in two informal settlements in Freetown, Sierra Leone (SL). The paper presents evidence from 16 participant and 5 stakeholder interviews; 5 focus groups and 4 events; combining this with the findings of a house-to-house AT survey; and two national studies—a country capacity assessment and an informal markets deep-dive. Despite citizenship activities being valued, a lack of AT was consistently reported and hindered participation. Stigma was also found to be a major barrier. AT access for the poorest must be addressed if citizenship participation for persons with disabilities is a genuine global intention and disability justice is to become a reality.

Cite

“Give Us the Chance to Be Part of You, We Want Our Voices to Be Heard”: Assistive Technology as a Mediator of Participation in (Formal and Informal) Citizenship Activities for Persons with Disabilities Who Are Slum Dwellers in Freetown, Sierra Leone

Austin, V.; Holloway, C.; Ossul Vermehren, I.; Dumbuya, A.; Barbareschi, G.; Walker, J. “Give Us the Chance to Be Part of You, We Want Our Voices to Be Heard”: Assistive Technology as a Mediator of Participation in (Formal and Informal) Citizenship Activities for Persons with Disabilities Who Are Slum Dwellers in Freetown, Sierra Leone. Int. J. Environ. Res. Public Health 2021, 18, 5547. https://doi.org/10.3390/ijerph...

“Give Us the Chance to Be Part of You, We Want Our Voices to Be Heard”: Assistive Technology as a Mediator of Participation in (Formal and Informal) Citizenship Activities for Persons with Disabilities Who Are Slum Dwellers in Freetown, Sierra Leone

Three young operators working for Humanity and Inclusion in Uganda assessing an elderly woman who uses a crutch

Type

Editorial

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
The Digital and Assistive Technologies for Ageing initiative: learning from the GATE initiative

Chapal Khasnabis, Catherine Holloway, Malcolm MacLachlan

We are now in an era of assistive care and assistive living—whereby many people, of all ages, in good health, and those who are more frail, or with cognitive or functional impairments, are using a broad range of technologies to assist and enhance their daily living. Assistive living1 is becoming an important part of population health and rehabilitation, which can help to maximise an individual's abilities, regardless of age or functional capacity. This encouraging shift in ethos has been strengthened by the response to the COVID-19 pandemic, in which a plethora of digital and remote technologies have been used.

The Lancet; 2020

The Digital and Assistive Technologies for Ageing initiative: learning from the GATE initiative

Type

Journal Paper

Themes

Assistive & Accessible Technology

Research Group

Local Productions
Additive manufacturing techniques for smart prosthetic liners

B Oldfrey, A Tchorzewska, R Jackson, M Croysdale, R Loureiro, C Holloway, M Miodownik

Elastomeric liners are commonly worn between socket and limb by prosthetic wearers. This is due to their superior skin adhesion, load distribution and their ability to form a seal. Laboratory tests suggest that elastomeric liners allow reduced shear stress on the skin and give a higher cushioning effect on bony prominences, since they are soft in compression, and similar to biological tissues [1]. However, they also increase perspiration reducing hygiene and increasing skin irritations. Prosthetic users in general face a myriad of dermatological problems associated with lower limb prosthesis such as ulcers, cysts, and contact dermatitis, which are exacerbated by the closed environment of a fitted socket where perspiration is trapped and bacteria can proliferate [2].

Medical Engineering & Physics; 2021

Visit publisher

Abstract

Additive manufacturing techniques for smart prosthetic liners

Elastomeric liners are commonly worn between the prosthetic socket and the limb. A number of improvements to the state of the art of liner technology are required to address outstanding problems. A liner that conforms to the residuum more accurately, may improve the skin health at the stump-socket interface. Previous work has shown that for effective thermal management of the socket environment, an active heat removal system is required, yet this is not available. Volume tracking of the stump could be used as a diagnostic tool for looking at the changes that occur across the day for all users, which depend on activity level, position, and the interaction forces of the prosthetic socket with the limb. We believe that it would be advantageous to embed these devices into a smart liner, which could be replaced and repaired more easily than the highly costly and labour-intensive custom-made socket. This paper presents the work to develop these capabilities in soft material technology, with: the development of a printable nanocomposite stretch sensor system; a low-cost digital method for casting bespoke prosthetic liners; a liner with an embedded stretch sensor for growth / volume tracking; a model liner with an embedded active cooling system.

Cite

Additive manufacturing techniques for smart prosthetic liners

, Additive manufacturing techniques for smart prosthetic liners, Medical Engineering & Physics, Volume 87, 2021, Pages 45-55, ISSN 1350-4533, https://doi.org/10.1016/j.mede....

Additive manufacturing techniques for smart prosthetic liners

A lady in a wheelchair in a building in Africa

Type

Journal Paper

Themes

Assistive & Accessible Technology
Culture and Participation

Research Group

Disability Interactions
“When They See a Wheelchair, They’ve Not Even Seen Me”—Factors Shaping the Experience of Disability Stigma and Discrimination in Kenya

Giulia Barbareschi, Mark T. Carew, Elizabeth Aderonke Johnson, Norah Kopi, Catherine Holloway

Stigmatizing attitudes and beliefs towards disability represent one of the most pervasive and complex barriers that limits access to health care, education, employment, civic rights and opportunities for socialization for people with disabilities [1,2,3]. The damaging impact of disability stigma is widely acknowledged and, according to article 8 of the UN Convention on the Rights of Persons with disabilities, developing strategies, campaigns, policies and other initiatives to combat disability stigma and ensure that all people with disabilities are treated with dignity and respect is also a duty of the 182 countries who ratified the treaty [4]. Although the majority of literature focused on understanding disability stigma has been carried out in high-income settings [5,6,7], in the last decade, an increasing number of scholars have conducted studies looking at the negative stereotypes, prejudices and inaccurate beliefs that shape disability stigma in the Global South [3,8,9,10]. Most of these studies have described how these stigmatizing beliefs are often driven by a combination of personal and societal factors, ranging from misconceptions concerning the causes of different impairments (e.g., disability to be seen as a form of curse or punishment); assumptions about the lack of capabilities of people with disabilities; or discriminatory practices that actively endorse separation between people with and without disabilities [3,9,11,12]. Yet, there is a dearth of comparative studies that examine the perspectives of both people with and without disabilities of disability stigma and discrimination, including how the use of assistive technology may shape stigmatizing interactions.

International Journal of Environmental Research and Public Health; 2021

Visit publisher

Abstract

“When They See a Wheelchair, They’ve Not Even Seen Me”—Factors Shaping the Experience of Disability Stigma and Discrimination in Kenya

Disability stigma in many low- and middle-income countries represents one of the most pervasive barriers preventing people with disabilities from accessing equal rights and opportunities, including the uptake of available assistive technology (AT). Previous studies have rarely examined how disability stigma may be shaped through factors endemic to social interactions, including how the use of assistive technology itself may precipitate or alleviate disability stigma. Through two strands of work, we address this gap. Via a series of focus groups with Kenyans without disabilities (Study 1) and secondary data analysis of consultations with Kenyans with disabilities and their allies (Study 2), we identify shared and divergent understandings of what shapes disability stigma and discrimination. Specifically, Kenyans with and without disabilities were cognizant of how religious/spiritual interpretations of disability, conceptions of impairments as “different” from the norm, and social stereotypes about (dis)ability shaped the experience of stigma and discrimination. Moreover, both groups highlighted assistive technology as an influential factor that served to identify or “mark” someone as having a disability. However, whereas participants without disabilities saw assistive technology purely as an enabler to overcome stigma, participants with disabilities also noted that, in some cases, use of assistive technologies would attract stigma from others.

Cite

“When They See a Wheelchair, They’ve Not Even Seen Me”—Factors Shaping the Experience of Disability Stigma and Discrimination in Kenya

Barbareschi G, Carew MT, Johnson EA, Kopi N, Holloway C. “When They See a Wheelchair, They’ve Not Even Seen Me”—Factors Shaping the Experience of Disability Stigma and Discrimination in Kenya. International Journal of Environmental Research and Public Health. 2021; 18(8):4272. https://doi.org/10.3390/ijerph...

“When They See a Wheelchair, They’ve Not Even Seen Me”—Factors Shaping the Experience of Disability Stigma and Discrimination in Kenya

Photograph of an informal settlement

Type

Journal Paper

Themes

Inclusive Design
Culture and Participation

Research Group

Disability Interactions
Bridging the Divide: Exploring the use of digital and physical technology to aid mobility impaired people living in an informal setlement

Giulia Barbareschi, Ben Oldfrey, Long Xin, Grace N. Magomere, Wyclife A. Wetende, Carol Wanjira, Joyce Olenja, Victoria Austin, and Catherine Holloway

The World Health Organisation estimate that there are approximately a billion people with disabilities who require access to appropriate assistive technology and this number is set to double by 2050 [82]. Assistive technologies (ATs) play a crucial role in the lives of people with disabilities and are necessary to be able to access essential services and participate in family and community life according to one’s aspirations [40, 62, 68, 81]. Although this is not often specifcally mentioned, the large majority of people with disabilities will routinely use more than one assistive device in their everyday lives [25, 26]. For example a person with a visual impairment is likely to use a white cane to navigate from their house to the office where they work and have a screen-reader, or an equivalent accessibility software, on their computer to be able to do their work once in the office [17].

ASSETS '20: Proceedings of the 22nd International ACM SIGACCESS Conference on Computers and Accessibility; 2020

Download Visit publisher

Abstract

Bridging the Divide: Exploring the use of digital and physical technology to aid mobility impaired people living in an informal setlement

Living in informality is challenging. It is even harder when you have a mobility impairment. Traditional assistive products such as wheelchairs are essential to enable people to travel. Wheelchairs are considered a Human Right. However, they are difficult to access. On the other hand, mobile phones are becoming ubiquitous and are increasingly seen as an assistive technology. Should therefore a mobile phone be considered a Human Right? To help understand the role of the mobile phone in contrast of a more traditional assistive technology – the wheelchair, we conducted contextual interviews with eight mobility impaired people who live in Kibera, a large informal settlement in Nairobi. Our findings show mobile phones act as an accessibility bridge when physical accessibility becomes too challenging. We explore our findings from two perspective – human infrastructure and interdependence, contributing an understanding of the role supported interactions play in enabling both the wheelchair and the mobile phone to be used. This further demonstrates the critical nature of designing for context and understanding the social fabric that characterizes informal settlements. It is this social fabric which enables the technology to be useable.

Cite

Bridging the Divide: Exploring the use of digital and physical technology to aid mobility impaired people living in an informal setlement

Giulia Barbareschi, Ben Oldfrey, Long Xin, Grace Nyachomba Magomere, Wycliffe Ambeyi Wetende, Carol Wanjira, Joyce Olenja, Victoria Austin, and Catherine Holloway. 2020. Bridging the Divide: Exploring the use of digital and physical technology to aid mobility impaired people living in an informal settlement. In Proceedings of the 22nd International ACM SIGACCESS Conference on Computers and Accessibility (ASSETS '20). Association for Computing Machinery, New York, NY, USA, Article 50, 1–13. https://doi.org/10.1145/337362...

Bridging the Divide: Exploring the use of digital and physical technology to aid mobility impaired people living in an informal setlement

A man is photographed trying out a new Digital Innovation, he is wearing a VR headset

Type

Editorial

Themes

Assistive & Accessible Technology
Culture and Participation

Research Group

Social Justice
Critical Junctures in Assistive Technology and Disability Inclusion

It is clear from the events of the last 18 months that while technology has a huge potential for transforming the way we live and work, the entire ecosystem—from manufacturing to the supply chain—is vulnerable to the vagaries of that ecosystem, as well as having the potential to exacerbate new and existing inequalities [1]. Nowhere has this been more apparent than in the lives of people with disabilities, who make up around 15% of the world’s population and already face barriers to accessing education, employment, healthcare and other services [2]. Some of these barriers are a result of unequal access and opportunities. However, there is a growing movement to better understand how assistive technology systems and services can be designed to enable more robust and equitable access for all. As part of this growing movement, the Paralympic Games in Tokyo this autumn saw the launch of a new global campaign to transform the lives of the world’s 1.2 bn persons with disabilities: the ‘WeThe15’ campaign reached more than 4.5 billion people through its marketing and stands ready to be the biggest of its kind in history. Next year, the World Health Organization (WHO) and the United Nations Children’s Fund (UNICEF), AT scale and GDI Hub will publish the first World Report on Access to Assistive Technology, which will include research from the £20 million, UK Aid funded, GDI Hub-led, programme, AT2030. Ahead of that, in this Special Issue, we focus on how some events and situations—as diverse as the coronavirus pandemic and the Paralympics—can act as ‘critical junctures’ that can enable a rethink of the status quo to facilitate and promote change.

Sustainability; 2021

Visit publisher

Cite

Critical Junctures in Assistive Technology and Disability Inclusion

Kett, M.; Holloway, C.; Austin, V. Critical Junctures in Assistive Technology and Disability Inclusion. Sustainability 2021, 13, 12744. https://doi.org/10.3390/su1322...

Critical Junctures in Assistive Technology and Disability Inclusion

Image of artwork by Jason Wiltshire-Mills, featured on the front cover of DIX

Type

Book

Research Group

Disability Interactions
Disability Interactions Creating Inclusive Innovations

; 2021

Visit publisher

Abstract

Disability Interactions Creating Inclusive Innovations

Disability interactions (DIX) is a new approach to combining cross-disciplinary methods and theories from Human Computer Interaction (HCI), disability studies, assistive technology, and social development to co-create new technologies, experiences, and ways of working with disabled people. DIX focuses on the interactions people have with their technologies and the interactions which result because of technology use. A central theme of the approach is to tackle complex issues where disability problems are part of a system that does not have a simple solution. Therefore, DIX pushes researchers and practitioners to take a challenge-based approach, which enables both applied and basic research to happen alongside one another. DIX complements other frameworks and approaches that have been developed within HCI research and beyond. Traditional accessibility approaches are likely to focus on specific aspects of technology design and use without considering how features of large-scale assistive technology systems might influence the experiences of people with disabilities. DIX aims to embrace complexity from the start, to better translate the work of accessibility and assistive technology research into the real world. DIX also has a stronger focus on user-centered and participatory approaches across the whole value chain of technology, ensuring we design with the full system of technology in mind (from conceptualization and development to large-scale distribution and access). DIX also helps to acknowledge that solutions and approaches are often non-binary and that technologies and interactions that deliver value to disabled people in one situation can become a hindrance in a different context. Therefore, it offers a more nuanced guide to designing within the disability space, which expands the more traditional problem-solving approaches to designing for accessibility. This book explores why such a novel approach is needed and gives case studies of applications highlighting how different areas of focus—from education to health to work to global development—can benefit from applying a DIX perspective. We conclude with some lessons learned and a look ahead to the next 60 years of DIX.

Disability Interactions Creating Inclusive Innovations

Photograph of the Global Report On Assistive Technology paperback publication

Type

Editorial

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
Introduction to the companion papers to the global report on assistive technology

Johan Borg, Wei Zhang, Emma M. Smith, Cathy Holloway

GReAT, but do we care?

If accessible, assistive technology would be life changing for a billion people across the world today – and two billion people in 2050 (WHO, 2018). It would make the difference between independence and dependence, inclusion and exclusion, life and death. It holds the potential to improve and transform health, education, livelihood and social participation; fundamental human rights everyone is entitled to. And if we are lucky to grow old, the chances are that we all would use assistive technology by then. But do we care?

Assistive Technology, The Official Journal of RESNA; 2021

Visit publisher

Cite

Introduction to the companion papers to the global report on assistive technology

Johan Borg, Wei Zhang, Emma M. Smith & Cathy Holloway (2021) Introduction to the companion papers to the global report on assistive technology, Assistive Technology, 33:sup1, 1-2, DOI: 10.1080/10400435.2021.2003658

Introduction to the companion papers to the global report on assistive technology

A graphic displaying a balance point between supply and demand. The demand is higher than the supply

Type

Journal Paper

Themes

Assistive & Accessible Technology
Climate & Crisis Resilience

Research Group

Disability Interactions
Measuring assistive technology supply and demand: A scoping review

Jamie Danemayer, Dorothy Boggs, Emma M. Smith, Vinicius Delgado Ramos, Linamara Rizzo Battistella, Cathy Holloway, and Sarah Polack

An assistive product (AP) is defined as a product used exter-nally to the human body, whose primary purpose is to main-tain or improve an individual’s functioning and independence and thereby promote his or her well-being (WHO, 2016). Global population aging forecasts a rise in the need for solu-tions that support participation and independence, including APs. In this paper, we review current population-level AP supply and demand estimation methods for five priority APs and provide recommendations for improving national and global AP market evaluation.

Assistive Technology The Official Journal of RESNA; 2021

Visit publisher

Abstract

Measuring assistive technology supply and demand: A scoping review

The supply of and market demand for assistive products (APs) are complex and influenced by diverse stakeholders. The methods used to collect AP population-level market data are similarly varied. In this paper, we review current population-level AP supply and demand estimation methods for five priority APs and provide recommendations for improving national and global AP market evaluation. Abstracts resulting from a systematic search were double-screened. Extracted data include WHO world region, publication year, age-groups, AP domain(s), study method, and individual assessment approach.497 records were identified. Vision-related APs comprised 65% (n = 321 studies) of the body of literature; hearing (n = 59), mobility (n = 24), cognitive (n = 2), and studies measuring multiple domains (n = 92) were proportionately underrepresented. To assess individual AP need, 4 unique approaches were identified among 392 abstracts; 45% (n = 177) used self-report and 84% (n = 334) used clinical evaluation. Study methods were categorized among 431 abstracts; Cross-sectional studies (n = 312, 72%) and secondary analyses of cross-sectional data (n = 61, 14%) were most common. Case studies illustrating all methods are provided. Employing approaches and methods in the contexts where they are most well-suited to generate standardized AP indicators will be critical to further develop comparable population-level research informing supply and demand, ultimately expanding sustainable access to APs.

Cite

Measuring assistive technology supply and demand: A scoping review

Jamie Danemayer, Dorothy Boggs, Emma M. Smith, Vinicius Delgado Ramos, Linamara Rizzo Battistella, Cathy Holloway & Sarah Polack (2021) Measuring assistive technology supply and demand: A scoping review, Assistive Technology, 33:sup1, S35-S49, DOI: 10.1080/10400435.2021.1957039

Measuring assistive technology supply and demand: A scoping review

Photograph of a humanitarian context, large white tents temporarily placed on red mud

Type

Journal Paper

Themes

Assistive & Accessible Technology

Research Group

Humanitarian & Disasters
Meeting AT needs in humanitarian crises: The current state of provision

Golnaz Whittaker, Gavin Adam Wood, Giulia Oggero, Maria Kett, Kirstin Lange

This paper discusses the evidence available in the literature for the scale and quality of AT provision interventions in crises, and what is known about the challenges and facilitators of provision. We conducted a search of the academic literature and retained literature that reported on any form of AT provision following crisis, where international humanitarian response was in place, published in English between January 2010 and June 2020.

Assistive Technology The Official Journal of RESNA; 2021

Visit publisher

Abstract

Meeting AT needs in humanitarian crises: The current state of provision

Humanitarian coordination systems increasingly recognize and aim to respond to the needs of people with disabilities within populations affected by crises, spurred on by the UN Convention on the Rights of Persons with Disabilities (CRPD) which was adopted in 2006. Many agencies state their aim to meet the requirements of the CRPD using a “twin track” approach: ensuring the inclusion of people with disabilities in mainstream provision, alongside targeted support for their needs, which may include the need for Assistive Technology (AT). However, there is very little evidence of AT provision in humanitarian settings, which is a specific and urgent need for many people including the elderly and people with disabilities, and an implicit requirement of Article 11 of the CRPD and World Health Assembly resolution on improving access to assistive technology. There is also little evidence of effective mechanisms for AT provision in humanitarian settings. This is despite high and growing levels of unmet AT need in crises, and despite the legally binding requirement in the CRPD to provide AT for those who need it. AT provision faces unique challenges in humanitarian settings. This paper discusses the evidence available in the literature for the scale and quality of AT provision interventions in crises, and what is known about the challenges and facilitators of provision. We conducted a search of the academic literature and retained literature that reported on any form of AT provision following crisis, where international humanitarian response was in place, published in English between January 2010 and June 2020. We found very few examples in that academic literature of systematic and coordinated AT provision at the acute stage of crisis, and even less in the preparedness and post-acute stages. However, it is difficult to assess whether this is the result of insufficient academic attention or reflects a lack of provision. The small body of academic literature that describes AT provision in humanitarian settings paints a picture of small-scale provision, specialized to single types of impairments, and delivered by predominantly by NGOs. We also conducted a search of the gray literature, using the same inclusion criteria, in two countries: Afghanistan and South Sudan (case studies forthcoming). This gray literature provided supplementary evidence of the types of AT providers and AT provision available in those protracted crises. There are very few examples of how AT services can be scaled up (from a very low baseline) and maintained sustainably within a strengthened health system. The literature also describes more examples of provision of assistive products for mobility over assistive products for other impairments. If the paucity of literature on AT provision in humanitarian settings is a reflection of the scale of provision, this implies a deficiency in humanitarian response when it comes to providing people with AT needs with the essential products and services to which they have a right, and which will enable their access to basic, life-saving assistance. We conclude by providing recommendations for urgent actions that the AT and humanitarian community must take to fill this critical gap in the provision of essential products and services for a potentially marginalized and excluded group.

Cite

Meeting AT needs in humanitarian crises: The current state of provision

Golnaz Whittaker, Gavin Adam Wood, Giulia Oggero, Maria Kett & Kirstin Lange (2021) Meeting AT needs in humanitarian crises: The current state of provision, Assistive Technology, 33:sup1, S3-S16, DOI: 10.1080/10400435.2021.1934612

Meeting AT needs in humanitarian crises: The current state of provision

Graphic images of wheelchair configurations

Type

Conference Paper

Themes

Assistive & Accessible Technology
Value beyond function: analyzing the perception of wheelchair innovations in Kenya

Barbareschi, G; Daymond, S; Honeywill, J; Singh, A; Noble, D; Mbugua, N; Harris, I; Austin, V; Holloway, C

The World Health Organization (WHO) defines Assistive Technology (AT) as “an umbrella term covering the systems and services related to the delivery of assistive products and services” [6]. This definition highlights how AT encompasses not only the physical and digital products used by millions of persons with disabilities (PWDs) worldwide, but also the systems and services that accompany the provision of these devices [78].

ASSETS '20: The 22nd International ACM SIGACCESS Conference on Computers and Accessibility.; 2020

Visit publisher

Abstract

Value beyond function: analyzing the perception of wheelchair innovations in Kenya

Innovations in the field of assistive technology are usually evaluated based on practical considerations related to their ability to perform certain functions. However, social and emotional aspects play a huge role in how people with disabilities interact with assistive products and services. Over a five months period, we tested an innovative wheelchair service provision model that leverages 3D printing and Computer Aided Design to provide bespoke wheelchairs in Kenya. The study involved eight expert wheelchair users and five healthcare professionals who routinely provide wheelchair services in their community. Results from the study show that both users and providers attributed great value to both the novel service delivery model and the wheelchairs produced as part of the study. The reasons for their appreciation went far beyond the practical considerations and were rooted in the fact that the service delivery model and the wheelchairs promoted core values of agency, empowerment and self-expression.

Value beyond function: analyzing the perception of wheelchair innovations in Kenya

Mobile phone kiosk features mobile devices, plugs and other accesories.

Type

Conference Paper

Themes

Assistive & Accessible Technology
Culture and Participation
Inclusion and Independence: The impact of Mobile Technology on the Lives of Persons with Disabilities in Kenya and Bangladesh

Nusrat Jahan, Giulia Barbareschi, Clara Aranda Jan, Charles Musungu Mutuku, Naemur Rahman, Victoria Austin, Catherine Holloway

Worldwide it is estimated that there are over a billion people who live with some form of disability [1]. Approximately 80% of people with disabilities live in low-and-middle income countries (LMICs). The combination of an inaccessible environment compounded by socio-economic factors such as poverty and stigma, makes it more likely for people with disabilities to be marginalised and excluded from society [1]. Assistive Technologies (ATs) are known to bridge the accessibility gaps and allow for greater social inclusion. However, there is a lack of adequate access to ATs in LMICs, combined with often poorly designed services, which only magnifies these challenges, thus limiting the opportunities for persons with disabilities to live an independent life [2]. Despite the importance of AT, access to AT globally is inadequate with only 10 percent of those in need having access to the ATs that they need [2].

2020 IEEE Global Humanitarian Technology Conference

Visit publisher

Abstract

Inclusion and Independence: The impact of Mobile Technology on the Lives of Persons with Disabilities in Kenya and Bangladesh

Globally, mobile technology plays a significant role connecting and supporting people with disabilities. However, there has been limited research focused on understanding the impact of mobile technology in the lives of persons with disabilities in low or middle- income countries. This paper presents the findings of a participatory photovoice study looking at the role that mobile phones play in the daily lives of 16 persons with disabilities in Kenya and Bangladesh. Participants used a combination of pictures and voice recordings to capture their own stories and illustrate the impact that mobile phone use has on their lives. Through thematic analysis, we categorized the benefits of mobile phones captured by participants as 1) Improved social connection; 2) Increased independence and 3) Access to opportunities. While mobile phones are ubiquitously used for communication, for persons with disabilities they become essential assistive technologies that bridge barriers to opportunities which are not accessible otherwise. Our paper adds evidence to the need for mobile phones for persons with disabilities to enable communication and connectivity in support of development.

Cite

Inclusion and Independence: The impact of Mobile Technology on the Lives of Persons with Disabilities in Kenya and Bangladesh

N. Jahan et al., "Inclusion and Independence: The impact of Mobile Technology on the Lives of Persons with Disabilities in Kenya and Bangladesh," 2020 IEEE Global Humanitarian Technology Conference (GHTC), Seattle, WA, USA, 2020, pp. 1-8, doi: 10.1109/GHTC46280.2020.9342934.

Inclusion and Independence: The impact of Mobile Technology on the Lives of Persons with Disabilities in Kenya and Bangladesh

Type

Conference Paper

Themes

Assistive & Accessible Technology

Research Group

Local Productions
A Preliminary Study to Understand How Mainstream Accessibility and Digital Assistive Technologies Reaches People in Lower- and Middle-Income Countries

Tigmanshu Bhatnagar, George Torrens, Ben Oldfrey, Priya Morjaria
Felipe Ramos Barajas, Katherine Perry and Catherine Holloway

End Superscript

Access to information on digital platforms not only facilitates education, employment, entertainment, social interaction but also facilitates critical governmental services, ecommerce, healthcare services and entrepreneurship [1]. Article 9 of United Nations Convention on the Rights of Persons with Disabilities (UNCRPD) enforces its signatories to commit to provide full accessibility to every citizen of the nation [2]. This has helped to spearhead accessibility directives such as the European Accessibility Act [3] that aims to improve the functioning of markets for accessible products and services. Such directives contribute to ensure that mainstream digital technologies (smartphones, computers etc.) are accessible for everyone and without being socially remarkable, they are able to assist in daily living. Additionally, there is evidence that improving access in mainstream technologies improves product experience and usability for everyone [4]. However, mainstream access has not been fully realized, leading to inferior opportunities for people with disabilities, a disparity which is more prominent in lower and middle-income countries [5].

RESNA Annual Conference; 2021

A Preliminary Study to Understand How Mainstream Accessibility and Digital Assistive Technologies Reaches People in Lower- and Middle-Income Countries

Type

Journal Paper

Themes

Assistive & Accessible Technology

Research Group

Local Productions
Could Assistive Technology Provision Models Help Pave the Way for More Environmentally Sustainable Models of Product Design, Manufacture and Service in a Post-COVID World?

Ben Oldfrey, Giulia Barbareschi, Priya Morjaria, Tamara Giltsoff, Jessica Massie, Mark Miodownik and Catherine Holloway

From multiple studies conducted through the FCDO AT2030 Programme, as well as key literature, we examine whether Assistive Technology (AT) provision models could look towards more sustainable approaches, and by doing this benefit not only the environment, but also address the problems that the current provision systems have.

Sustainability

Visit publisher

Abstract

Could Assistive Technology Provision Models Help Pave the Way for More Environmentally Sustainable Models of Product Design, Manufacture and Service in a Post-COVID World?

From multiple studies conducted through the FCDO AT2030 Programme, as well as key literature, we examine whether Assistive Technology (AT) provision models could look towards more sustainable approaches, and by doing this benefit not only the environment, but also address the problems that the current provision systems have. We show the intrinsic links between disability inclusion and the climate crisis, and the particular vulnerability people with disabilities face in its wake. In particular, we discuss how localised circular models of production could be beneficial, facilitating context driven solutions and much needed service elements such as repair and maintenance. Key discussion areas include systems approaches, digital fabrication, repair and reuse, and material recovery. Finally, we look at what needs be done in order to enable these approaches to be implemented. In conclusion, we find that there are distinct parallels between what AT provision models require to improve equitable reliable access, and strategies that could reduce environmental impact and bring economic benefit to local communities. This could allow future AT ecosystems to be key demonstrators of circular models, however further exploration of these ideas is required to make sense of the correct next steps. What is key in all respects, moving forward, is aligning AT provision with sustainability interventions.

Cite

Could Assistive Technology Provision Models Help Pave the Way for More Environmentally Sustainable Models of Product Design, Manufacture and Service in a Post-COVID World?

Oldfrey, B.; Barbareschi, G.; Morjaria, P.; Giltsoff, T.; Massie, J.; Miodownik, M.; Holloway, C. Could Assistive Technology Provision Models Help Pave the Way for More Environmentally Sustainable Models of Product Design, Manufacture and Service in a Post-COVID World? Sustainability 2021, 13, 10867. https://doi.org/10.3390/su1319...

Could Assistive Technology Provision Models Help Pave the Way for More Environmentally Sustainable Models of Product Design, Manufacture and Service in a Post-COVID World?

Young man with prosthetic arm developed at low cost

Type

Journal Paper

Themes

Assistive & Accessible Technology

Research Group

Local Productions
A review of innovation strategies and processes to improve access to AT: Looking ahead to open innovation ecosystems

Catherine Holloway, Dafne Zuleima Morgado Ramirez, Tigmanshu Bhatnagar, Ben Oldfrey, Priya Morjaria, Soikat Ghosh Moulic, Ikenna D. Ebuenyi, Giulia Barbareschi, Fiona Meeks, Jessica Massie, Felipe Ramos-Barajas, Joanne McVeigh, Kyle Keane, George Torrens, P. V.M. Rao, Malcolm MacLachlan, Victoria Austin, Rainer Kattel, Cheryl D Metcalf & Srinivasan Sujatha

It is essential to understand the strategies and processes which are deployed currently across the Assistive Technology (AT) space toward measuring innovation. The main aim of this paper is to identify functional innovation strategies and processes which are being or can be deployed in the AT space to increase access to AT globally.

Assistive Technology The Official Journal of RESNA

Visit publisher

Abstract

A review of innovation strategies and processes to improve access to AT: Looking ahead to open innovation ecosystems

It is essential to understand the strategies and processes which are deployed currently across the Assistive Technology (AT) space toward measuring innovation. The main aim of this paper is to identify functional innovation strategies and processes which are being or can be deployed in the AT space to increase access to AT globally. We conducted a scoping review of innovation strategies and processes in peer-reviewed literature databases and complemented this by identifying case studies demonstrating innovation strategies. The review includes WHO world region, publication year, AT type and a sector analysis against the Systems-Market for Assistive and Related Technologies Framework. We analyzed the case studies and interviews using thematic analysis. We included 91 papers out of 3,127 after review along with 72 case studies. Our results showed that product innovations were more prevalent than provision or supply innovations across papers and case studies. Case studies yielded two themes: open innovation (OI); radical and disruptive innovation. Financial instruments which encourage OI are needed and we recommend pursuing OI for AT innovation. Embedding AT within larger societal missions will be key to success governments and investors need to understand what AT is and their translational socioeconomic value.

Cite

A review of innovation strategies and processes to improve access to AT: Looking ahead to open innovation ecosystems

Catherine Holloway, Dafne Zuleima Morgado Ramirez, Tigmanshu Bhatnagar, Ben Oldfrey, Priya Morjaria, Soikat Ghosh Moulic, Ikenna D. Ebuenyi, Giulia Barbareschi, Fiona Meeks, Jessica Massie, Felipe Ramos-Barajas, Joanne McVeigh, Kyle Keane, George Torrens, P. V.M. Rao, Malcolm MacLachlan, Victoria Austin, Rainer Kattel, Cheryl D Metcalf & Srinivasan Sujatha (2021) A review of innovation strategies and processes to improve access to AT: Looking ahead to open innovation ecosystems, Assistive Technology, 33:sup1, 68-86, DOI: 10.1080/10400435.2021.1970653

A review of innovation strategies and processes to improve access to AT: Looking ahead to open innovation ecosystems

A venn diagram of People Place and Practice, overlapping circles showing the relationship

Type

Journal Paper

Themes

Inclusive Design
Co-creating Inclusive Public Spaces: Learnings from Four Global Case Studies on inclusive Cities

Public spaces, including recreational and social spaces, are often not prioritised. Inclusive public spaces are fundamental to participation and inclusive in society. Including persons with disabilities in the design and planning of the built environment supports equal rights and helps identify people’s aspirations for inclusive environments. Four city case studies will be discussed in this paper: Ulaanbaatar, Mongolia; Varanasi, India; Surakarta, Indonesia; and Nairobi, Kenya.

The Journal of Public Space

Visit publisher

Abstract

Co-creating Inclusive Public Spaces: Learnings from Four Global Case Studies on inclusive Cities

This paper presents some of the findings from a global research study on inclusive infrastructure and city design and will focus on inclusive public spaces. Persons with disabilities can experience multi-dimensional exclusion from urban life, including but not limited to physical, attitudinal and social barriers. Public spaces, including recreational and social spaces, are often not prioritised. Inclusive public spaces are fundamental to participation and inclusive in society. Including persons with disabilities in the design and planning of the built environment supports equal rights and helps identify people’s aspirations for inclusive environments.
Four city case studies will be discussed in this paper: Ulaanbaatar, Mongolia; Varanasi, India; Surakarta, Indonesia; and Nairobi, Kenya. Research participants and objectives are organised by three stakeholder groups:


  1. People - first-hand experiences of persons with disabilities living in the city and their aspirations for a more inclusive city
  2. Policy - the awareness and understanding of inclusive design among policy-makers
  3. Practice - the awareness and understanding of inclusive design among practitioners including barriers to implementation, opportunities and the relationship with assistive technology

Methods include document reviews, interviews, photo diaries and co-design workshops with participatory and inclusive engagement of persons with disabilities throughout. Findings on public spaces are discussed in three ways:


  1. The types of public spaces valued by participants in each of the four cities.
  2. The barriers and challenges experienced by persons with disabilities in the public realm.
  3. Aspirations for more inclusive public spaces and opportunities for inclusive design

The paper concludes by discussing how the targeted stakeholder groups of people, policy and practice also help represent three essential dimensions of inclusive city design and forming a framework for successful implementation and delivery and supporting targets set out through the UNCRPD and Sustainable Development Goals (SDGs).

Cite

Co-creating Inclusive Public Spaces: Learnings from Four Global Case Studies on inclusive Cities

Patrick, M. and McKinnon, I. (2022) “Co-creating Inclusive Public Spaces: Learnings from Four Global Case Studies on inclusive Cities”, The Journal of Public Space, 7(2), pp. 93–116. doi: 10.32891/jps.v7i2.1500.

Co-creating Inclusive Public Spaces: Learnings from Four Global Case Studies on inclusive Cities

A group of people are photographed in sports wear in an athletic stadium

Type

Journal Paper

Themes

Culture and Participation

Research Group

Social Justice
Paralympic Broadcasting in Sub-Saharan Africa: Sport, Media and Communication for Social Change

Jessica Noske-Turner, Emma Pullen, Mufunanji Magalasi, Damian Haslett, Jo Tacchi

Communication & Sport

Visit publisher

Abstract

Paralympic Broadcasting in Sub-Saharan Africa: Sport, Media and Communication for Social Change

The purpose of this commentary is to discuss how Paralympic coverage in sub-Saharan Africa can be effectively mobilised to stimulate discursive and structural change around disability. Paralympic coverage has demonstrated its pedagogical power to engage public(s) and challenge stigma toward disability. Yet, the Global picture of Paralympic broadcasting is deeply uneven, with audiences in parts of the Global South afforded limited opportunities to watch the Games. Considering this, the International Paralympic Committee has begun to broadcast Paralympic coverage across sub-Saharan Africa with an explicit aim to challenge stigma toward disability. In this article, we draw on examples from research to argue that ideas from the field of Communication for Social Change (CfSC) can add value towards this aim. We begin by providing a brief overview of CfSC before critically examining one of the field’s key concepts – Communicative (E)ecologies. Following this, we critically reflect on the potential of Paralympic broadcasting as a vehicle for social change and disability rights agendas in sub-Saharan Africa. We argue that thinking with CfSC concepts show the importance of a ‘decentred’ media approach that engages with disability community advocacy groups, localised communication activities and practices, and culturally specific disability narratives.

Cite

Paralympic Broadcasting in Sub-Saharan Africa: Sport, Media and Communication for Social Change

Noske-Turner, J., Pullen, E., Magalasi, M., Haslett, D., & Tacchi, J. (2022). Paralympic Broadcasting in Sub-Saharan Africa: Sport, Media and Communication for Social Change. Communication & Sport, 10(5), 1001–1015. https://doi.org/10.1177/216747...

Paralympic Broadcasting in Sub-Saharan Africa: Sport, Media and Communication for Social Change

Type

Toolkit
Innovate Now Toolkit

As an entrepreneur, learning how to solve problems by creating and experimenting with different strategies is a core pillar of the entrepreneurial mindset you need to succeed. However, there’s rarely a single correct way to solve problems as an entrepreneur, so you need to learn how to create and compare different solutions.

The open entrepreneurship toolkit is a set of learning materials that can help you and your team do just that. Covering the domains of user, product, market and business development, the set of cards have been designed to be used by two or more group members to actively experiment with different solutions.

Innovate Now

Innovate Now Toolkit

Kenyan man holding a prosthesis

Type

PhD

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
Specifying a Hybrid, Multiple Material CAD System for Next Generation Prosthetic Design

Troy Bodkin

Doctoral Thesis. This work is one of four multidisciplinary research studies conducted by members of this research cluster, focusing on the area of Computer Aided Design (CAD) for improving the interface with Additive Manufacture (AM) to solve some of the challenges presented with improving prosthetic socket design, with an aim to improve and streamline the process to enable the involvement of clinicians and patients in the design process.

Loughborough University

Visit publisher

Abstract

Specifying a Hybrid, Multiple Material CAD System for Next Generation Prosthetic Design

For many years, the biggest issue that causes discomfort and hygiene issues for patients with lower limb amputations have been the interface between body and prosthetic, the socket. Often made of an inflexible, solid polymer that does not allow the residual limb to breathe or perspire and with no consideration for the changes in size and shape of the human body caused by changes in temperature or environment, inflammation, irritation and discomfort often cause reduced usage or outright rejection of the prosthetic by the patient in their day to day lives. To address these issues and move towards a future of improved quality of life for patients who suffer amputations, Loughborough University formed the Next Generation Prosthetics research cluster. This work is one of four multidisciplinary research studies conducted by members of this research cluster, focusing on the area of Computer Aided Design (CAD) for improving the interface with Additive Manufacture (AM) to solve some of the challenges presented with improving prosthetic socket design, with an aim to improve and streamline the process to enable the involvement of clinicians and patients in the design process. The research presented in this thesis is based on three primary studies. The first study involved the conception of a CAD criteria, deciding what features are needed to represent the various properties the future socket outlined by the research cluster needs. These criteria were then used for testing three CAD systems, one each from the Parametric, Non Uniform Rational Basis Spline (NURBS) and Polygon archetypes respectively. The result of these tests led to the creation of a hybrid control workflow, used as the basis for finding improvements. The second study explored emerging CAD solutions, various new systems or plug-ins that had opportunities to improve the control model. These solutions were tested individually in areas where they could improve the workflow, and the successful solutions were added to the hybrid workflow to improve and reduce the workflow further. The final study involved taking the knowledge gained from the literature and the first two studies in order to theorise how an ideal CAD system for producing future prosthetic sockets would work, with considerations for user interface issues as well as background CAD applications. The third study was then used to inform the final deliverable of this research, a software design specification that defines how the system would work. This specification was written as a challenge to the CAD community, hoping to inform and aid future advancements in CAD software. As a final stage of research validation, a number of members of the CAD community were contacted and interviewed about their feelings of the work produced and their feedback was taken in order to inform future research in this area.

Cite

Specifying a Hybrid, Multiple Material CAD System for Next Generation Prosthetic Design

Bodkin, Troy L. (2017): Specifying a hybrid, multiple material CAD system for next-generation prosthetic design. Loughborough University. Thesis. https://hdl.handle.net/2134/25...;

Specifying a Hybrid, Multiple Material CAD System for Next Generation Prosthetic Design

Image of a young man in a red t-shirt sitting in his wheelchair inside a community space

Type

PhD

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
YouTransfer, YouDesign: A Participatory Approach to Design Assistive Technology for Wheelchair Transfers

Giulia Barbareschi

Doctoral Thesis. This thesis makes two contributions to facilitate wheelchair users’ engagement in the participatory design process for ATs, while being mindful of the burden of participation. The first contribution is a framework that provides a modular structure guiding the participatory design process from initial problem identification and analysis to facilitating collaborations between wheelchair users and designers. The framework identifies four factors determining the need and adoption process for ATs: (i) People focuses on the target population, (ii) Person includes personal characteristics, (iii) Activity refers to the challenges associated with the task, and (iv) Context encompasses the effect of the environment in which the activity takes place. The second contribution constitutes a rich picture of personal and external elements influencing real world wheelchair transfers that emerged from four studies carried out to investigate the effect of the framework factors on the design process for ATs.

UCL (University College London)

Visit publisher

Abstract

YouTransfer, YouDesign: A Participatory Approach to Design Assistive Technology for Wheelchair Transfers

Transferring independently to and from their wheelchair is an essential routine task for many wheelchair users but it can be physically demanding and can lead to falls and upper limb injuries that reduce the person’s independence. New assistive technologies (ATs) that facilitate the performance of wheelchair transfers have the potential to allow wheelchair users to gain further independence. To ensure that users’ needs are addressed by ATs, the active involvement of wheelchair users in the process of design and development is critical. However, participation can be burdensome for many wheelchair users as design processes where users are directly involved often require prolonged engagement. This thesis makes two contributions to facilitate wheelchair users’ engagement in the participatory design process for ATs, while being mindful of the burden of participation. The first contribution is a framework that provides a modular structure guiding the participatory design process from initial problem identification and analysis to facilitating collaborations between wheelchair users and designers. The framework identifies four factors determining the need and adoption process for ATs: (i) People focuses on the target population, (ii) Person includes personal characteristics, (iii) Activity refers to the challenges associated with the task, and (iv) Context encompasses the effect of the environment in which the activity takes place. The second contribution constitutes a rich picture of personal and external elements influencing real world wheelchair transfers that emerged from four studies carried out to investigate the effect of the framework factors on the design process for ATs. A related outcome based on these contributions is a framing document to share knowledge between wheelchair users and designers to provide focus and promote an equal collaboration among participants.

Cite

YouTransfer, YouDesign: A Participatory Approach to Design Assistive Technology for Wheelchair Transfers

Barbareschi, Giulia. “YouTransfer, YouDesign : a Participatory Approach to Design Assistive Technology for Wheelchair Transfers / Giulia Barbareschi.” Thesis (Ph.D.)--University College London, 2018., 2018. Print.

YouTransfer, YouDesign: A Participatory Approach to Design Assistive Technology for Wheelchair Transfers

A man holding a bicycle seat with a 3d printed splint on his wrist

Type

PhD

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
Understanding wrist splint user needs and personalisation through codesign

Charlotte Pyatt

A Doctoral Thesis. Submitted in partial fulfilment of the requirements for the award of the degree of Doctor of Philosophy at Loughborough University.

Loughborough University

Visit publisher

Abstract

Understanding wrist splint user needs and personalisation through codesign

Wrist splints are a common treatment for rheumatoid arthritis, however their effectiveness is compromised by patients not wearing splints as often as prescribed. Previous research has identified a number of reasons for non-compliance, but typically lacks insights that could lead to improved splint design.

This thesis investigates the motivators for patients to wear and not wear their wrist splints and, the impact of personalisation of splint appearance on patient wear. The work is based on the premise that digital design and manufacturing processes, such as Computer-Aided Design (CAD) and 3D Printing, can produce bespoke splints on demand.

The research begins with a literature review across the core areas of: splinting, additive manufacture, product appearance and personalisation. This literature review identifies gaps in knowledge from which research questions are established for the work.

The research employs a qualitative, generative design research approach and, follows a codesign framework employing telling, making and enacting tools. The thesis is made up of three studies. The first study is a sensitisation study and uses design probes to prepare the participants for the research and begin exploring the problem space. The second is a comprehensive study into participants splint wear behaviour and uses context mapping and scenario picture card tools to investigate the motivators for participants to wear and not wear wrist splints, along with positive and negative outcomes or wearing/not wearing splints. The final study uses a personalisation toolkit to elicit patient needs for a future wrist splint design and investigate self-reported expectations regarding compliance of patients who used the toolkit.

The research finds that patient compliance is affected by practical and aesthetic limitations of current splints. It identifies 4 motivating factors to wear a splint and 10 motivating factors to not wear a splint. Additionally, it identifies 6 positive outcomes of wearing splints, 6 negative outcomes of wearing splints, 3 positive outcomes of not wearing splints and 3 negative outcomes of not wearing splints. Requirements for an improved splint design are established and form the basis of the design for a prototype personalisation toolkit. Testing of this toolkit reveals that patients are keen to own more than one splint and personalise splints to match the scenario in which it is to be worn. Patients reported that they expected to be more compliant with a personalised splint when compared to their current splint.

Cite

Understanding wrist splint user needs and personalisation through codesign

Pyatt, Charlotte (2018): Understanding wrist splint user needs and personalisation through codesign. Loughborough University. Thesis. https://doi.org/10.26174/thesi...;

Understanding wrist splint user needs and personalisation through codesign

A screenshot of examples of common interfaces of wheelchair use, a joy stick, head control and sip/puff switch

Type

PhD

Themes

Assistive & Accessible Technology
Shared Control for Wheelchair Interfaces

Dr Chinemelu Ejiamatu Muoma Ezeh

Doctoral Thesis. Independent mobility is fundamental to the quality of life of people with impairment. Most people with severe mobility impairments, whether congenital, e.g., from cerebral palsy, or acquired, e.g., from spinal cord injury, are prescribed a wheelchair. A small yet significant number of people are unable to use a typical powered wheelchair controlled with a joystick. Instead, some of these people require alternative interfaces such as a head- array or Sip/Puff switch to drive their powered wheelchairs. However, these alternative interfaces do not work for everyone and often cause frustration, fatigue and collisions. This thesis develops a novel technique to help improve the usability of some of these alternative interfaces, in particular, the head-array and Sip/Puff switch.

UCL (University College London)

Visit publisher

Abstract

Shared Control for Wheelchair Interfaces

Independent mobility is fundamental to the quality of life of people with impairment. Most people with severe mobility impairments, whether congenital, e.g., from cerebral palsy, or acquired, e.g., from spinal cord injury, are prescribed a wheelchair. A small yet significant number of people are unable to use a typical powered wheelchair controlled with a joystick. Instead, some of these people require alternative interfaces such as a head- array or Sip/Puff switch to drive their powered wheelchairs. However, these alternative interfaces do not work for everyone and often cause frustration, fatigue and collisions. This thesis develops a novel technique to help improve the usability of some of these alternative interfaces, in particular, the head-array and Sip/Puff switch. Control is shared between a powered wheelchair user, using an alternative interface and a pow- ered wheelchair fitted with sensors. This shared control then produces a resulting motion that is close to what the user desires to do but a motion that is also safe. A path planning algorithm on the wheelchair is implemented using techniques in mo- bile robotics. Afterwards, the output of the path planning algorithm and the user’s com- mand are both modelled as random variables. These random variables are then blended in a joint probability distribution where the final velocity to the wheelchair is the one that maximises the joint probability distribution. The performance of the probabilistic approach to blending the user’s inputs with the output of a path planner, is benchmarked against the most common form of shared control called linear blending. The benchmarking consists of several experiments with end users both in a simulated world and in the real-world. The thesis concludes that probabilistic shared control provides safer motion compared with the traditional shared control for difficult tasks and hard-to-use interfaces.

Cite

Shared Control for Wheelchair Interfaces

Ezeh, Chinemelu Ejiamatu Muoma. Shared Control for Wheelchair Interfaces. UCL (University College London), 2018. Print.

Shared Control for Wheelchair Interfaces

Screenshot of a page of the thesis describing function & Type of Maxillofacial Prostheses

Type

PhD

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
Materials For Facial Prostheses In Resource Limited Countries

Sophia Esther Liiba Tetteh

A Doctoral Thesis. Submitted in partial fulfilment of the requirements for the award of the degree of Doctor of Philosophy of Loughborough University

Loughborough University

Visit publisher

Abstract

Materials For Facial Prostheses In Resource Limited Countries

Facial prostheses are artificial devices that replace a missing body part in the facial and neck regions of the body. Defects or deformities in these regions can lead to functional deficiencies; social and psychological effects in addition to cosmetic defects. Restoration or rehabilitation in resource limited countries is usually provided by charities and organisations volunteering assistance overseas, with some training of local staff in the fabrication of these prostheses. Furthermore, these countries typically lack technical knowhow and trained personnel. In industrialised nations maxillofacial prosthetics has developed into a sophisticated medical speciality requiring highly skilled staff and expensive facilities. In resource limited countries surgical procedures may be an option for rehabilitation of these deformities/defects however, they tend to be unavailable or unaffordable and donated prostheses are not suitable. Hence, this research explores, from first principles, the appropriate and affordable local provision of maxillofacial prostheses in resource constrained regions. The investigation provides knowledge on identifying requirements for resource limited areas, resulting in the creation of a guideline constituting priorities, requirements and specifications. It further explores the viability of potentially cheaper, locally available candidate materials via weathering and antimicrobial methods in ascertaining material longevity.

Cite

Materials For Facial Prostheses In Resource Limited Countries

Tetteh, Sophia (2019): Materials for facial prostheses in resource-limited countries. Loughborough University. Thesis. https://doi.org/10.26174/thesi...;

Materials For Facial Prostheses In Resource Limited Countries

Kenyan man holding a prosthesis

Type

PhD

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
Exploring Thermal Discomfort Amongst Lower-Limb Prosthesis Wearers

Rhys James Williams

Thesis: Firstly, the research provides a methodological contribution showing how to conduct mixed-methods research to obtain rich insights into complex prosthesis phenomena. Secondly, the research highlights the need to appreciate psychological and contextual factors when researching prosthesis wearer thermal comfort. The research contributions are also converted into an implication for prosthesis design. The concept of 'regaining control' to psychologically mitigate thermal discomfort could be incorporated into technologies by using 'on-demand' thermal discomfort relief, rather than 'always-on' solutions, as have been created in the past.

UCL, ProQuest Dissertations Publishing

Visit publisher

Abstract

Exploring Thermal Discomfort Amongst Lower-Limb Prosthesis Wearers

Amongst lower-limb prosthesis wearers, thermal discomfort is a common problem with an estimated prevalence of more than 50%. Overheating does not just create discomfort to the user, but it has been linked to excessive sweating, skin damage caused by a moist environment and friction. Due to impermeable prosthetic components and a warm moist environment, minor skin damage can result in skin infections that can lead to prosthesis cessation, increased social anxiety, isolation and depression. Despite the seriousness of thermal discomfort, few studies explore the issue, with research predominantly constrained to controlled laboratory scenarios, with only one out of laboratory study. In this thesis, studies investigate how thermal discomfort arises and what are the consequences of thermal discomfort for lower-limb prosthesis wearers. Research studies are designed around the principles of presenting lived experiences of the phenomenon and conducting research in the context of participants' real-life activities. A design exploration chapter investigates modifying liner materials and design to create a passive solution to thermal discomfort. However, this approach was found to be ineffective and unfeasible. Study 1 presents a qualitative study which investigates the user experience of a prosthesis, thermal discomfort and related consequences. Study 2 explores limb temperature of male amputees inside and outside the laboratory, with the latter also collecting perceived thermal comfort (PTC) data. Finally, Study 3 investigates thermal discomfort in the real-world and tracks limb temperature, ambient conditions, activities, and experience sampling of PTC. While there were no apparent relationships presented in sensor data, qualitative data revealed that in situations where prosthesis wearers perceived a lack of control, thermal discomfort seemed to be worse. When combined, the studies create two knowledge contributions. Firstly, the research provides a methodological contribution showing how to conduct mixed-methods research to obtain rich insights into complex prosthesis phenomena. Secondly, the research highlights the need to appreciate psychological and contextual factors when researching prosthesis wearer thermal comfort. The research contributions are also converted into an implication for prosthesis design. The concept of 'regaining control' to psychologically mitigate thermal discomfort could be incorporated into technologies by using 'on-demand' thermal discomfort relief, rather than 'always-on' solutions, as have been created in the past.

Cite

Exploring Thermal Discomfort Amongst Lower-Limb Prosthesis Wearers

Williams, Rhys James. “Exploring Thermal Discomfort Amongst Lower-Limb Prosthesis Wearers.” ProQuest Dissertations Publishing, 2020. Print.

Exploring Thermal Discomfort Amongst Lower-Limb Prosthesis Wearers

3D printing

Type

PhD

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
Design rules for additively-manufactured wrist splints

Sarah Kelly

A Doctoral Thesis. Submitted in partial fulfilment of the requirements for the award of the degree of Doctor of Philosophy of Loughborough University.

Loughborough University

Visit publisher

Abstract

Design rules for additively-manufactured wrist splints

Additive Manufacturing (AM) often known by the term three-dimensional printing (3DP) has been acknowledged as a potential manufacturing revolution. AM has many advantages over conventional manufacturing techniques; AM techniques manufacture through the addition of material - rather than traditional machining or moulding methods. AM negates the need for tooling, enabling cost-effective low-volume production in high-wage economies and the design & production of geometries that cannot be made by other means. In addition, the removal of tooling and the potential to grow components and products layer-by-layer means that we can produce more from less in terms of more efficient use of raw materials and energy or by making multifunctional components and products. The proposed Centre for Doctoral Training (CDT) in Additive Manufacturing and 3D Printing has the vision of training the next generation of leaders, scientists and engineers in this diverse and multi-disciplinary field. As AM is so new current training programmes are not aligned with the potential for manufacturing and generally concentrate on the teaching of Rapid Prototyping principles, and whilst this can be useful background knowledge, the skills and requirements of using this concept for manufacturing are very different. This CDT will be training cohorts of students in all of the basic aspects of AM, from design and materials through to processes and the implementation of these systems for manufacturing high value goods and services. The CDT will also offer specialist training on aspects at the forefront of AM research, for example metallic, medical and multi-functional AM considerations. This means that the cohorts graduating from the CDT will have the background knowledge to proliferate throughout industry and the specialist knowledge to become leaders in their fields, broadening out the reach and appeal of AM as a manufacturing technology and embedding this disruptive technology in company thinking. In order to give the cohorts the best view of AM, these students will be taken on study tours in Europe and the USA, the two main research powerhouses of AM, to learn from their international colleagues and see businesses that use AM on a daily basis. One of the aims of the CDT in AM is to educate and attract students from complementary basic science, whether this be chemistry, physics or biology. This is because AM is a fast moving area. The benefits of having a CDT in AM and coupling with students who have a more fundamental science base are essential to ensure innovation & timeliness to maintain the UK's leading position. AM is a disruptive technology to a number of industrial sectors, yet the CDTs industrial supporters, who represent a breadth of industrial end-users, welcome this disruption as the potential business benefits are significant. Growing on this industry foresight, the CDT will work in key markets with our supporters to ensure that AM is positioned to provide a real and lasting contribution & impact to UK manufacturing and provide economic stability and growth. This contribution will provide societal benefits to UK citizens through the generation of wealth and employment from high value manufacturing activities in the UK.

Cite

Design rules for additively-manufactured wrist splints

Kelly, Sarah (2020): Design rules for additively-manufactured wrist splints. Loughborough University. Thesis. https://doi.org/10.26174/thesi...;

Design rules for additively-manufactured wrist splints

Type

PhD

Themes

Assistive & Accessible Technology
Emotionally driven Prostheses: Exploring the Effects on Users’ Lives and Societies’ Attitudes in the UK and Greece

Anna Vlachaki

The literature shows that research into the aesthetic aspects of prostheses is limited. Although there are suggestions that prostheses with high levels of emotionally-driven design may improve users’ well-being, they are based only on theoretical findings. Therefore, in this thesis the effects of emotionally-driven prostheses on users’ lives and society’s attitudes were explored, with respect to culture and more specifically, the theories of individualism/ collectivism. In order to investigate the effects of culture, the research was conducted in two countries with different cultures; the UK (individualistic) and Greece (collectivistic). The thesis began with a literature review across three core areas: user, product and environment, and revealed the importance of investigating an additional area; that of prosthetists. The research employed a qualitative approach and consisted of four studies.

Loughborough University

Visit publisher

Abstract

Emotionally driven Prostheses: Exploring the Effects on Users’ Lives and Societies’ Attitudes in the UK and Greece

The literature shows that research into the aesthetic aspects of prostheses is limited. Although there are suggestions that prostheses with high levels of emotionally-driven design may improve users’ well-being, they are based only on theoretical findings. Therefore, in this thesis, the effects of emotionally-driven prostheses on users’ lives and society’s attitudes were explored, with respect to culture and more specifically, the theories of individualism/ collectivism. In order to investigate the effects of culture, the research was conducted in two countries with different cultures; the UK (individualistic) and Greece (collectivistic). The thesis began with a literature review across three core areas: user, product and environment, and revealed the importance of investigating an additional area; that of prosthetists. The research employed a qualitative approach and consisted of four studies. Study I was an online questionnaire to explore users’ preferences towards prostheses, with respect to their culture. Study II consisted of semi-structured interviews and informational probes to comprehend the role of prostheses on users’ lives, with respect to prosthetic appearance. In Study III, the aim was to investigate prosthetists’ attitudes towards the needs of prosthetic users by conducting semi-structured interviews. Finally, Study IV was an online questionnaire to explore non-users’ attitudes towards the design of prostheses. The research showed that the use of prostheses for the completion of users’ body was not an adequate factor to improve their well-being, and a shift on users’ desires towards emotionally-driven prostheses has occurred. From the variables that were tested, sex, age, cause and area of limb-loss may affect people’s attitudes towards the design of prostheses. Furthermore, the results showed that prostheses with high emotionally-driven design evoked emotions, in both users and non-users, with higher levels of pleasantness and arousal than the emotions that were elicited by the prostheses of lower emotionally-driven designs and thus, they may trigger a greater behavioural reaction. This suggested that emotionally-driven prostheses may eliminate users’ stigmatisation by increasing their self-confidence and altering society’s attitudes. However, attention needs to be paid in collectivistic countries, as emotionally-driven prostheses may enhance users’ stigmatisation.

Cite

Emotionally driven Prostheses: Exploring the Effects on Users’ Lives and Societies’ Attitudes in the UK and Greece

Vlachaki, Anna (2020): Emotionally-driven prostheses: exploring the effects on users’ lives and societies’ attitudes in the UK and Greece. Loughborough University. Thesis. https://doi.org/10.26174/thesi...;

Emotionally driven Prostheses: Exploring the Effects on Users’ Lives and Societies’ Attitudes in the UK and Greece

Type

Working Paper

Themes

Culture and Participation

Research Group

Disability Interactions
Barriers to Access and Retain Formal Employment for Persons with Disabilities in Bangladesh and Kenya

Nusrat Jahan and Catherine Holloway

This working paper was developed to support the development of challenge statements for a GDI Hub innovation challenge fund call related to improving access to and retention of employment for persons with disabilities in Kenya and Bangladesh and is written by GDI Hub's Nusrat Jahan and Professor Catherine Holloway.

The issue of disability and employment has taken centre stage on the global arena in part because it is recognised across several areas of the United Nations Sustainable Development Goals, in which confrontation of extreme poverty in its many manifestations is the number one goal [2]. The World Health Organization (2011) reports about 15 percent of the world’s population has a disability [1]. In developing countries, 80 to 90 percent of people with disabilities of working age are unemployed.

Download

Abstract

Barriers to Access and Retain Formal Employment for Persons with Disabilities in Bangladesh and Kenya

Globally persons with disabilities have lower employment rates compared to the general population due to systemic barriers particularly in the formal sector. In developing countries, 80 percent to 90 percent of people with disabilities of working age are unemployed. There has been limited research in low-income and middle-income countries focused on the barriers to access and retain formal employment for persons with disabilities. The aim of this paper, based on desk research, is to analyse the barriers to access and retain formal employment of persons with disabilities which are framed in three categories according to where the barriers primarily manifest: 1. In the workplace among employers and co-workers without disabilities, 2. Among persons with disabilities seeking or engaged in formal employment and 3. In the wider social, physical and policy environment. Although the study mainly focuses on Kenya and Bangladesh other countries’ literature on access to and retention of employment of persons with disabilities were reviewed where relevant. In the current context where the global pandemic is breaking barriers to remote working one part of the solution will be to empower persons with disabilities with appropriate access to Information and Communication Technology, assistive devices and services, digital skills, creating more accessible and inclusive digital platforms for persons with disabilities which also hold the potential to improve working conditions and productivity for the whole workforce as well as enhancing resilience to potential future shocks.

Cite

Barriers to Access and Retain Formal Employment for Persons with Disabilities in Bangladesh and Kenya

Jahan & Holloway, 2020, Barriers to Access and Retain Formal Employment for Persons with Disabilities in Bangladesh and Kenya, GDI Hub Working Paper Series Issue 01

Barriers to Access and Retain Formal Employment for Persons with Disabilities in Bangladesh and Kenya

12-step London 2012 Disability Inclusion Model: Graphic text includes the following 12 steps positioned in a square shape around the GDI Hub logo. 1. community leaders articulation of needs and priorities, 2. P/political leadership, 3. Clear mission and joint objective setting, 4. Time limited action, 5. Governance by disabled people and community leaders, 6. Diverse partnerships where everyone can drive change, 7. Expert technical assistance and mainstreamed training, 8. Resources, resourcefulness and tools, 9. Inclusive innovation encouraged, 10. Good enough data, scrutiny and progress management, 11. Culture of excellence (beyond contractual compliance) & consequences of failure (to try), 12. Reflection and recognition of success

Type

Journal Paper

Themes

Culture and Participation

Research Group

Social Justice
This Is the Story of Community Leadership with Political Backing. (PM1)" Critical Junctures in Paralympic Legacy: Framing the London 2012 Disability Inclusion Model for New Global Challenges ?"

Disability inclusion necessitates proactive efforts to ensure everybody has an independent and equitable opportunity to meaningfully participate in the activities of their choosing [1,2,3]. Furthermore, disability justice is not a minority concern. There are more than a billion disabled people worldwide, and impairment is something which affects most people’s family right now and will impact all of us over our lifetime. The United Nations Convention on the Rights of Persons with Disabilities (UNCRPD) enshrines human rights of all disabled people [4], and in 2015 the Sustainable Development Goals (SDG’s) recognised disability inclusion for the first time with the call to ‘leave no-one behind’. Increasingly, governments, non-governmental agencies and businesses alike are seeking to develop and implement policy and practice which enables greater social inclusion for disabled people (In this paper, Disabled People is used in line with the Social Model of Disability in the UK, though please note the UN uses ‘Persons with Disabilities’ as is common in North America) [5]. Eighty percent of the disabled people in the world live in low resource settings in the Global South [3] with a projected growth of this number due to an increase in population age, there is the ever-pressing need to critically evaluate how best to approach disability inclusion to build a societies where we all can flourish. Despite this, we lack case studies of how disability inclusion can be done well—in the literature and in practice. For this reason, we set out to undertake this research using one the most recognised cases of ‘disability inclusion done well’.

Sustainability

Visit publisher

Abstract

This Is the Story of Community Leadership with Political Backing. (PM1)" Critical Junctures in Paralympic Legacy: Framing the London 2012 Disability Inclusion Model for New Global Challenges ?"

The London 2012 Paralympic Games was called “the most successful Paralympic Games ever” (by the then-President of the IPC), and it saw more athletes from more countries than ever before compete and become global heroes for the first time in a redeveloped part of East London which also hosted “the most accessible Olympic Games ever” that summer. However, the model used to design and deliver disability inclusion for London 2012, and its legacy, has never been explicitly written up. This paper presents new primary evidence from first-hand research from those who were involved; retrospectively framing the London 2012 Disability Inclusion Model such that it might be usable and developed for other global disability challenges. We used an adapted Delphi methodology, through four rounds: beginning with an initial hypothesis and testing through semi-structured interviews with ten key players in the London 2012 disability inclusion approach. Using thematic analysis with consensus building surveys and workshops we came to a settled unanimous agreement on the 12-step London 2012 Disability Inclusion Model comprising three parts: (Get ready) community-led mission setting, (Get set) essential building blocks and (Go) enabling a culture of success. The model is presented here, alongside a narrative on its uniqueness and replicability to other major programs, as a public good. We welcome its active use, testing and adaption by others in service of disability innovation for a fairer world.

Cite

This Is the Story of Community Leadership with Political Backing. (PM1)" Critical Junctures in Paralympic Legacy: Framing the London 2012 Disability Inclusion Model for New Global Challenges ?"

Victoria Austin, Kate Mattick, and Cathy Holloway. 2021. "“This Is the Story of Community Leadership with Political Backing. (PM1)” Critical Junctures in Paralympic Legacy: Framing the London 2012 Disability Inclusion Model for New Global Challenges" Sustainability 13, no. 16: 9253. https://doi.org/10.3390/su13169253

This Is the Story of Community Leadership with Political Backing. (PM1)" Critical Junctures in Paralympic Legacy: Framing the London 2012 Disability Inclusion Model for New Global Challenges ?"

Type

Workshop

Themes

Assistive & Accessible Technology
Culture and Participation
Rethinking the Senses: A Workshop on Multisensory Embodied Experiences and Disability Interactions

Maryam Bandukda, Aneesha Singh, Catherine Holloway, Nadia Berthouze, Emeline Brulé, Ana Tajadura-Jiménez, Oussama Metatla, Ana Javornik, and Anja Thieme

The emerging possibilities of multisensory interactions provide an exciting space for disability and open up opportunities to explore new experiences for perceiving one's own body, it's interactions with the environment and also to explore the environment itself. In addition, dynamic aspects of living with disability, life transitions, including ageing, psychological distress, long-term conditions such as chronic pain and new conditions such as long-COVID further affect people's abilities. Interactions with this diversity of embodiments can be enriched, empowered and augmented through using multisensory and cross-sensory modalities to create more inclusive technologies and experiences. To explore this, in this workshop we will explore three related sub-domains: immersive multi-sensory experiences, embodied experiences, and disability interactions and design.

CHI EA '21: Extended Abstracts of the 2021 CHI Conference on Human Factors in Computing Systems

Visit publisher

Abstract

Rethinking the Senses: A Workshop on Multisensory Embodied Experiences and Disability Interactions

The emerging possibilities of multisensory interactions provide an exciting space for disability and open up opportunities to explore new experiences for perceiving one's own body, it's interactions with the environment and also to explore the environment itself. In addition, dynamic aspects of living with disability, life transitions, including ageing, psychological distress, long-term conditions such as chronic pain and new conditions such as long-COVID further affect people's abilities. Interactions with this diversity of embodiments can be enriched, empowered and augmented through using multisensory and cross-sensory modalities to create more inclusive technologies and experiences. To explore this, in this workshop we will explore three related sub-domains: immersive multi-sensory experiences, embodied experiences, and disability interactions and design. The aim is to better understand how we can re-think the senses in technology design for disability interactions and the dynamic self, constructed through continuously changing sensing capabilities either because of changing ability or because of the empowering technology. This workshop will: (i) bring together HCI researchers from different areas, (ii) discuss tools, frameworks and methods, and (iii) form a multidisciplinary community to build synergies for further collaboration.

Cite

Rethinking the Senses: A Workshop on Multisensory Embodied Experiences and Disability Interactions

Maryam Bandukda, Aneesha Singh, Catherine Holloway, Nadia Berthouze, Emeline Brulé, Ana Tajadura-Jiménez, Oussama Metatla, Ana Javornik, and Anja Thieme. 2021. Rethinking the Senses: A Workshop on Multisensory Embodied Experiences and Disability Interactions. Extended Abstracts of the 2021 CHI Conference on Human Factors in Computing Systems. Association for Computing Machinery, New York, NY, USA, Article 118, 1–5. DOI:https://doi.org/10.1145/341176...

Rethinking the Senses: A Workshop on Multisensory Embodied Experiences and Disability Interactions

Photo looking down at feet and a cane standing on a texture pavement

Type

Conference Paper

Themes

Assistive & Accessible Technology
Opportunities for Supporting Self-efficacy through Orientation and Mobility Training Technologies for Blind and Partially Sighted People

Maryam Bandukda, Catherine Holloway, Aneesha Singh, Giulia Barbareschi, Nadia Berthouze

We conducted semi-structured interviews with 20 BPS people and 8 Mobility and Orientation Trainers (MOT). The interviews were thematically analysed and organised into four overarching themes discussing factors influencing the self-efficacy belief of BPS people: Tools and Strategies for O&M training, Technology Use in O&M Training, Changing Personal and Social Circumstances, and Social Influences. We further highlight opportunities for combinations of multimodal technologies to increase access to and effectiveness of O&M training.

ASSETS '21: Proceedings of the 23rd International ACM SIGACCESS Conference on Computers and Accessibility

Visit publisher

Abstract

Opportunities for Supporting Self-efficacy through Orientation and Mobility Training Technologies for Blind and Partially Sighted People

Orientation and mobility (O&M) training provides essential skills and techniques for safe and independent mobility for blind and partially sighted (BPS) people. The demand for O&M training is increasing as the number of people living with vision impairment increases. Despite the growing portfolio of HCI research on assistive technologies (AT), few studies have examined the experiences of BPS people during O&M training, including the use of technology to aid O&M training. To address this gap, we conducted semi-structured interviews with 20 BPS people and 8 Mobility and Orientation Trainers (MOT). The interviews were thematically analysed and organised into four overarching themes discussing factors influencing the self-efficacy belief of BPS people: Tools and Strategies for O&M training, Technology Use in O&M Training, Changing Personal and Social Circumstances, and Social Influences. We further highlight opportunities for combinations of multimodal technologies to increase access to and effectiveness of O&M training.

Opportunities for Supporting Self-efficacy through Orientation and Mobility Training Technologies for Blind and Partially Sighted People

Kenyan man in a wheelchair - his face is obscured for privacy

Type

Conference Paper

Themes

Assistive & Accessible Technology
What difference does tech make? Conceptualizations of Disability and Assistive Technology among Kenyan Youth: Conceptualizations of Disability and AT

In this paper, we examine how young Kenyans without disabilities view people with disabilities and AT users. Findings show that while the portrayal of disability is often shaped by negative emotion, participants felt that many of the barriers affecting people with disabilities were created by society. Perceptions of AT differed –devices were not only seen as a mark of disability but also as a sign of access to resources. Therefore, what we see is an emergent picture where social barriers can be reinforced by poverty, and where poverty reinforces social barriers faced by people with disabilities. We conclude that access to appropriate technology alongside societal interventions tackling incorrect beliefs about disability can help to overcome the stigma faced by people with disabilities.

ASSETS '21: Proceedings of the 23rd International ACM SIGACCESS Conference on Computers and Accessibility

Visit publisher

Abstract

What difference does tech make? Conceptualizations of Disability and Assistive Technology among Kenyan Youth: Conceptualizations of Disability and AT

Most research which investigates stigma towards with people with disabilities and the use of Assistive Technology (AT) are based in the Global North and focus on the experiences of people with disabilities and the consequences that stigma has on choices surrounding AT. However, stigma is a societal construct rooted in the attitude and beliefs that people without disabilities hold on disability and AT. Furthermore, the portrayal of people with disabilities and AT is dependent on the social context. In this paper, we examine how young Kenyans without disabilities view people with disabilities and AT users. Findings show that while the portrayal of disability is often shaped by negative emotion, participants felt that many of the barriers affecting people with disabilities were created by society. Perceptions of AT differed –devices were not only seen as a mark of disability but also as a sign of access to resources. Therefore, what we see is an emergent picture where social barriers can be reinforced by poverty, and where poverty reinforces social barriers faced by people with disabilities. We conclude that access to appropriate technology alongside societal interventions tackling incorrect beliefs about disability can help to overcome the stigma faced by people with disabilities.

Cite

What difference does tech make? Conceptualizations of Disability and Assistive Technology among Kenyan Youth: Conceptualizations of Disability and AT

Giulia Barbareschi, Norah Shitawa Kopi, Ben Oldfrey, and Catherine Holloway. 2021. What difference does tech make? Conceptualizations of Disability and Assistive Technology among Kenyan Youth: Conceptualizations of Disability and AT. In The 23rd International ACM SIGACCESS Conference on Computers and Accessibility (ASSETS '21). Association for Computing Machinery, New York, NY, USA, Article 18, 1–13. DOI: https://doi.org/10.1145/3441852.3471226

What difference does tech make? Conceptualizations of Disability and Assistive Technology among Kenyan Youth: Conceptualizations of Disability and AT

A boy using crutches is about to kick a ball into the net

Type

Editorial

Themes

Assistive & Accessible Technology
A right to the frivolous? Renegotiating a wellbeing agenda for AT research

Giulia Barbareschi & Tom Shakespeare

Assistive products (APs) are broadly defined as “any product (including devices, equipment, instruments, and software), either specially designed and produced or generally available, whose primary purpose is to maintain or improve an individual’s functioning and independence and thereby promote their wellbeing” (Khasnabis et al., 2015). Although the concept of wellbeing is extremely slippery and researchers have yet to agree on a single definition for it, as individuals we instinctively develop mental models about what does, and does not, promote our happiness and wellbeing. Considerations about values, wellbeing and happiness are extremely personal and are shaped by a variety of factors ranging from our age and socio-cultural background to our life experiences (Schwartz & Bardi, 2001).

RESNA

Visit publisher

Abstract

A right to the frivolous? Renegotiating a wellbeing agenda for AT research

Assistive products (APs) are broadly defined as “any product (including devices, equipment, instruments, and software), either specially designed and produced or generally available, whose primary purpose is to maintain or improve an individual’s functioning and independence and thereby promote their wellbeing” (Khasnabis et al., 2015). Although the concept of wellbeing is extremely slippery and researchers have yet to agree on a single definition for it, as individuals we instinctively develop mental models about what does, and does not, promote our happiness and wellbeing. Considerations about values, wellbeing and happiness are extremely personal and are shaped by a variety of factors ranging from our age and socio-cultural background to our life experiences (Schwartz & Bardi, 2001).

However, when it comes to assistive technology (AT) research, our focus seems to be primarily geared toward values and activities in the domains of education, employment, transport or health, often framed according to an outcome driven perspective that is heavily influenced by what is seen as useful (often what is measurable), vs what is frivolous (less tangible social or emotional aspects).

This disparity parallels the priorities of the disability rights movement and disability studies research that have helped to shape the research agenda around disability and AT. Often influenced by labor movement politics, or feminism, there appears to have been more concern with public and practical aspects of social life as opposed to the more private and sensitive ones (Shakespeare, 2014). The focus on the public utilitarian function of AT becomes even more evident when we consider AT research carried out in the Global South. In this context the success of an intervention is usually assessed using measures of outcome and impact which can be somehow linked to economic improvement (Alkire, 2016).

In this editorial, we are not suggesting that enabling people with disabilities to gain a good education, obtain a fulfilling job or be able to vote are not important goals for the APs we develop and research. But are those the only worthwhile goals? Should we not also enquire whether existing and future APs could help people with disabilities to develop meaningful friendships, enjoy fulfilling sex lives with their partners of choice, cook sociable dinners, or engage in their favorite hobbies? Although sporadic publications focus on the role of APs in the context of personal relationships, sexuality, or fun and play for people with disabilities do exist, these are rare, and often framed around utilitarian goals. For example, research around AT and play is largely focused on children and often examined in connection to learning outcomes. Similarly, sex and sexuality are often explored solely in connection to dysfunction, abuse or sexual health (Shakespeare & Richardson, 2018).

These unbalanced narratives show how the AT research agenda is dictated by a set of universal priorities that are largely focused on global measurable goals that do not necessarily match the everyday values of people with disabilities. We invite researchers and practitioners to consider ways to find a better balance between public and private aspects of life, and between utilitarian and emotional values. Both approaches have a significant impact on the lives of people with disabilities.

Ultimately, as AT researchers we need to actively engage with people with disabilities to uncover their priorities, understand what different people with disabilities most value in life, and identify how current and future APs might help to make a positive impact on wellbeing. Aspects of life such as friendship, socialization, sexuality, love and play might indeed be more frivolous than practical ones such as education, health, employment and civil rights, but they are inherent to our shared humanity and fundamental to our happiness.

Cite

A right to the frivolous? Renegotiating a wellbeing agenda for AT research

Giulia Barbareschi & Tom Shakespeare (2021) A right to the frivolous? Renegotiating a wellbeing agenda for AT research, Assistive Technology, 33:5, 237, DOI: 10.1080/10400435.2021.1984112

A right to the frivolous? Renegotiating a wellbeing agenda for AT research

A dusty market street in an African country

Type

Workshop

Themes

Assistive & Accessible Technology

Research Group

Disability Interactions
Disability Design and Innovation in Low Resource Settings: Addressing Inequality Through HCI.

Giulia Barbareschi, Dafne Zuleima Morgado-Ramirez, Catherine Holloway, Swami Manohar Swaminathan, Aditya Vashistha, and Edward Cutrell.

Approximately 15% of the world's population has a disability and 80% live in low resource-settings, often in situations of severe social isolation. Technology is often inaccessible or inappropriately designed, hence unable to fully respond to the needs of people with disabilities living in low resource settings. Also lack of awareness of technology contributes to limited access. This workshop will be a call to arms for researchers in HCI to engage with people with disabilities in low resourced settings to understand their needs and design technology that is both accessible and culturally appropriate.

Extended Abstracts of the 2021 CHI Conference on Human Factors in Computing Systems.

Abstract

Disability Design and Innovation in Low Resource Settings: Addressing Inequality Through HCI.

Approximately 15% of the world's population has a disability and 80% live in low resource-settings, often in situations of severe social isolation. Technology is often inaccessible or inappropriately designed, hence unable to fully respond to the needs of people with disabilities living in low resource settings. Also lack of awareness of technology contributes to limited access. This workshop will be a call to arms for researchers in HCI to engage with people with disabilities in low resourced settings to understand their needs and design technology that is both accessible and culturally appropriate. We will achieve this through sharing of research experiences, and exploration of challenges encountered when planning HCI4D studies featuring participants with disabilities. Thanks to the contributions of all attendees, we will build a roadmap to support researchers aiming to leverage post-colonial and participatory approaches for the development of accessible and empowering technology with truly global ambitions.

Cite

Disability Design and Innovation in Low Resource Settings: Addressing Inequality Through HCI.

Giulia Barbareschi, Dafne Zuleima Morgado-Ramirez, Catherine Holloway, Swami Manohar Swaminathan, Aditya Vashistha, and Edward Cutrell. 2021. Disability Design and Innovation in Low Resource Settings: Addressing Inequality Through HCI. Extended Abstracts of the 2021 CHI Conference on Human Factors in Computing Systems. Association for Computing Machinery, New York, NY, USA, Article 124, 1–5. DOI:https://doi.org/10.1145/3411763.3441340

Disability Design and Innovation in Low Resource Settings: Addressing Inequality Through HCI.

A sheet of material with a regular matrix of flat and raised nodules

Type

Conference Paper

Themes

Assistive & Accessible Technology
Inclusive Educational Technology
Transforming a Monolithic Sheet of Nitinol into a Passive Reconfigurable Tactile Pixel Array Display at Braille Resolution

Tigmanshu Bhatnagar, Nicolai Marquardt, Mark Miodownik, Catherine Holloway

Shape changing materials create a unique opportunity to design reconfigurable tactile display actuators. In this paper, we present a method that transforms a single thin monolithic sheet of Nitinol into a passive reconfigurable tactile pixel array at Braille resolution. We have designed a 27x27 tactile pixel array in which each pixel can be selectively actuated with an external source of heat. The pixels rise 0.4mm vertically with a peak blocked force of 0.28kg and have an average blocked force of 0.23kg at room temperature. After cooling, the pixels can be mechanically reconfigured back to their flat state for repeatable actuation. We demonstrate this actuator’s interactive capabilities through a novel erasable tactile drawing interface.

IEEE World Haptics Conference; 2021

Abstract

Transforming a Monolithic Sheet of Nitinol into a Passive Reconfigurable Tactile Pixel Array Display at Braille Resolution

Shape changing materials create a unique opportunity to design reconfigurable tactile display actuators. In this paper, we present a method that transforms a single thin monolithic sheet of Nitinol into a passive reconfigurable tactile pixel array at Braille resolution. We have designed a 27x27 tactile pixel array in which each pixel can be selectively actuated with an external source of heat. The pixels rise 0.4mm vertically with a peak blocked force of 0.28kg and have an average blocked force of 0.23kg at room temperature. After cooling, the pixels can be mechanically reconfigured back to their flat state for repeatable actuation. We demonstrate this actuator’s interactive capabilities through a novel erasable tactile drawing interface.

Cite

Transforming a Monolithic Sheet of Nitinol into a Passive Reconfigurable Tactile Pixel Array Display at Braille Resolution

T. Bhatnagar, N. Marquardt, M. Miodownik and C. Holloway, "Transforming a Monolithic Sheet of Nitinol into a Passive Reconfigurable Tactile Pixel Array Display at Braille Resolution," 2021 IEEE World Haptics Conference (WHC), 2021, pp. 409-414, doi: 10.1109/WHC49131.2021.9517239.

Transforming a Monolithic Sheet of Nitinol into a Passive Reconfigurable Tactile Pixel Array Display at Braille Resolution